ACREL ADL SERIES DIN RAIL ENERGY METER
Acrel ADL series products adopt DIN35mm guide rail installation structure, compact size, can measure electric energy and other electrical parameters, clock, rate time and other parameters can be set, high precision, good reliability, performance indicators in line with CE, UL certification of the technical requirements of the energy meter, and has the power pulse output function; RS485 communication interface can be used to realize data exchange with the host computer.
ADL Series Din Rail Energy Meter For Sale
Acrel din rail mounted energy meter is suitable for government agencies and large public buildings to measure electric energy by item, and can also be used for enterprises and institutions for electric energy management.
ADL3000-E Three Phase Multifunction Energy Meter
ADL400 Three Phase Din Rail Energy Meter
ADL200 Single Phase Din Rail Energy Meter
ADL100-ET Single Phase Din Rail Energy Meter with CT
ADL10-E Single Phase Din Rail Energy Meter
ADL Series Din Rail Energy Meter Datasheet
|
Type |
ADL10-E |
ADL100-ET |
ADL200 |
|
|
Voltage |
Reference voltage |
AC 220V |
AC 220V |
AC 220V |
|
Reference frequency |
45-65 Hz |
50Hz |
50Hz |
|
|
Consumption |
<10VA( Single phase) |
<10VA |
<10VA |
|
|
Current |
Maximum current |
60A |
60A,100A |
80A |
|
Starting current |
4‰Ib |
|||
|
Consumption |
<4VA(Maximum current) |
<4VA |
<1VA |
|
|
Measurement performance |
Accuracy |
Class 1 |
kWh Class 1 |
kWh Class 0.5 |
|
Standards compliant |
IEC 62053-21:2003 |
IEC 62053-21:2003 |
IEC 62053-21:2003 |
|
|
Pluse |
Pluse width |
80+20 ms |
80±20ms |
80±20ms |
|
Pluse constant |
3200 imp/kWH |
1600imp/kWh |
1000imp/kWh,10000imp/kWh |
|
|
Communication |
Interface |
RS485 |
RS485(A+、B-) |
RS485 |
|
Protocol |
Modbus-RTU |
Modbus-RTU |
Modbus-RTU |
|
|
Outling |
L*W*H(mm) |
18*88*70 |
88*36*70 |
90*36*65 |
|
Temperature range |
Work |
-25℃-55℃ |
-25℃~55℃ |
-25℃-55℃ |
|
Storage |
-40℃-70℃ |
-40℃~70℃ |
-40℃-70℃ |
|
|
Humidity |
≤95%(No condensation) |
≦95% (No condensation) |
≦95% (No condensation) |
≦95% (No condensation) |
|
Altitude |
<2000m |
<2000m |
<2000m |
<2000m |
|
Type |
ADL400 |
ADL3000 |
|
|
Voltage |
Reference voltage |
3*57.7/100V, 3*220/380V, 3*100V, 3*380V |
3*57.7/100V,3*220/380V,3*100V,3*380V |
|
Reference frequency |
45-65 Hz |
50Hz |
|
|
Consumption |
<10VA( Single phase) |
<10VA(Single phase) |
|
|
Current |
Maximum current |
6A,80A |
6A,80A |
|
Starting current |
Direct connect:0.004 Ib;Connect via:0.001 In |
Direct connect:0.004lb;Connect via:0.001ln |
|
|
Consumption |
<4VA(Single phase rated current) |
<1VA(Single phase rated current) |
|
|
Measurement performance |
Accuracy |
Class 0.5S |
Class 0.5 |
|
Standards compliant |
IEC 62053-21:2003 |
IEC 62053-22:2003 |
|
|
Pluse |
Pluse width |
80+20 ms |
80+20 ms |
|
Pluse constant |
400imp/kWH,6400imp/kWH |
400imp/kWH,6400imp/kWH |
|
|
Communication |
Interface |
RS485 |
RS485 |
|
Protocol |
Modbus-RTU |
Modbus-RTU |
|
|
Outling |
L*W*H(mm) |
72*88*70 |
|
|
Temperature range |
Work |
-25℃-55℃ |
-25℃~55℃ |
|
Storage |
-40℃-70℃ |
-40℃~70℃ |
|
|
Humidity |
≤95%(No condensation) |
≦95% (No condensation) |
≦95% (No condensation) |
|
Altitude |
<2000m |
<2000m |
<2000m |
Working principle Of Din Rail Energy Meter
ADL Series 3 phase kwh meter din railuse electronic circuits/chips to measure electrical energy; With partial pressure resistance or voltage signal into voltage transformer can be used for electronic measurement of small signal and current signal in the shunt or current transformer can be used for electronic measurement of small signal, using special power measurement chip will transform a good voltage and current signals are analog or digital multiplication, and electricity were accumulated, and then output frequency is proportional to the power of the pulse signal, Digital display after microcomputer processing.
ADL Series Din Rail Wireless Energy MeterFAQs
How To Calculate Maximum Demand In Energy Meter?
We will write the maximum demand function into the program of the energy meter, just need to click the button to turn the page to view the maximum demand.
How Energy Meter Calculate Power Factor?
Our energy meter has the function of measuring the power factor, and the corresponding power factor can be directly viewed on the display interface.
How Energy Meter Works?
When the energy meter is connected to the circuit under test, it will sample the voltage, current and other signals on the line to the chip, and then send to MCU through pulse, and then complete the calculation and display of various power parameters.
Now the price of 3 phase power meter modbusis reasonable, anything you need, please contact us.
Send product request
Other supplier products
 |
ACREL ATC600 WIRELESS TEMPERATURE TRANSMIT | ATC600wireless transceiver is used with ARTM wireless temperature measurement system. It can be used in 3~35kV indoor switch cabinets, including ce... |
 |
ACREL PZ72L-DE MULTIFUNCTION DC ENERGY METER | PZ series intelligent DC atorch electric energy meteris designed for applications such as DC panels, solar power, telecommunications base stations,... |
 |
POWER QUALITY DEVICE | Acrel power quality device is mainly used for power supply and distribution equipment at the user end, and provides power quality improvement equip... |
 |
POWER QUALITY DEVICE | Acrel power quality device is mainly used for power supply and distribution equipment at the user end, and provides power quality improvement equ... |
 |
DATA CENTER MONITOR | Multi-Circuit Monitoring Wireless Communication Terminal Acrel based on customer needs, we integrate the characteristics of data center opera... |
