.

2RB 510-7AH06 Side Channel Blower/Vacuum Pump

Greentech International (Zhangqiu) Co., Ltd is the professional side channel blower supplier.
The impellers in the G_series machines are mounted directly on the motor shaft for noncontact compression entirely without friction. Maximum operational reliability, even at high differential pressures. Is ensured by the arrangement of the bearings outside the compression chamber.
The gas it taken in through the inlet. As it enters the side channel, the rotating impeller. Imparts velocity to the gas in the direction of rotation. Centrifugal force in the imp eller blades accelerates the gas outward and the pressure increase. Every rotation adds kinetic energy. Resulting in the further increase of the pressure along the side channel. The side channel narrow at the rotor, sweeping the gas off the impeller blades and discharging it through the outlet silencer where it exits the side channel blower.
Features:
1. Beautiful surface
2. Easy installation
3. Low noise level
4. No vibration, and therefore complete dynamic stability
5. Pulsation-free discharge
6. Minimal maintenance
7. Higher pressure ratio
8. Cooler running bearings
9. Longer grease life
10. Simple maintenance
11.100%oil-free air
12. Suitable for environmental protection
13. Small dimensions
14 continuous duty


Send product request

To: Greentech International (Zhangqiu) Co., Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

4rb 620-0ah57-8 Vacuum Pump/Side Channel Blower
4rb 620-0ah57-8 Vacuum Pump/Side Channel Blower Greentech International (Zhangqiu) Co., Ltd is the professional side channel blower supplier.The impellers in the G_series machines are mounted dir...
Nsrh150 Tri-Lobe Roots Blower/Easy to Manufacture
Nsrh150 Tri-Lobe Roots Blower/Easy to Manufacture Features of SeriesNSRHTri-Lobe Roots Blower: 1. Each model has a performance table and standard specification, easy to select fan model;2 Includin...
2sk-12 Liquid Ring Vacuum Pump/Motor Not Included
2sk-12 Liquid Ring Vacuum Pump/Motor Not Included Applications SK series water/liquid ring vacuum pump and compressor are widely used in machinery, petrochemical, pharmaceutical, food, sugar, and e...
Lz150b40 Maglev Turbo Blower/Industrial professional
Lz150b40 Maglev Turbo Blower/Industrial professional constituent:The impeller of magnetic suspension centrifugal fan is driven by direct connection between AL7075 impeller and motor. The efficiency of...
2BV2 071 Water Ring Vacuum Pump
2BV2 071 Water Ring Vacuum Pump 2BV2 071 Water Ring Vacuum Pump2BV series liquidring vacuum pumps are suitable for pumping the gases and steam. Its suction pressure can reach 33mb...
All supplier products

Same products

Ring Blower (2RB310A11) Air Blower
Ring Blower (2RB310A11) Air Blower Seller: Greentech Industry (Jinan) Co., Ltd Features:1. Beautiful surface2. Easy installation3. Low noise level4. No vibration, and therefore...
Energy Saving High Pressure Low Noise Rotary Air Blower for Industrial/Aquaculture
Energy Saving High Pressure Low Noise Rotary Air Blower for Industrial/Aquaculture Seller: Greentech International (Zhangqiu) Co., Ltd HC rotary air blower structure and working principleThe rotary blower has an exquisite structure ...
Easy to Install Hc Rotary Air Blower for Laboratory Water Treat
Easy to Install Hc Rotary Air Blower for Laboratory Water Treat Seller: Greentech International (Zhangqiu) Co., Ltd HC rotary air blower structure and working principleThe rotary blower has an exquisite structure ...
Lt200A Roots Blower Positive Pressure Suitable for Industrial Heavy-Duty Applications
Lt200A Roots Blower Positive Pressure Suitable for Industrial Heavy-Duty Applications Seller: Greentech International (Zhangqiu) Co., Ltd Greentech International (Zhangqiu) Co., Ltd. is a leading manufacturer of blowers and vacuum pump...
Greentech Lt-065 380V Low-Noise Three-Lobe Roots Blower
Greentech Lt-065 380V Low-Noise Three-Lobe Roots Blower Seller: Greentech International (Zhangqiu) Co., Ltd Three lobes blowers are new series roots type blowers. By cnc machinewe made precise rotors to pr...