Electric waterproof two-component Silicone encapsulant for sealing pcb
All supplier products
RoHs Compliance: Yes
Features：
Room temperature cure or rapid hot cure.
Addition cure, no byproduct,
Low shrinkage.
Excellent thermal conductive property and dielectrically property.
UL94 V-0
Applications:
Encapsulation for
Power supplies
Connectors
Sensors
Integrates circuit
Solar cells
Processing
The two components should be thoroughly mixed using a weight or volume ratio of 1:1 until the mixture has a uniform color.Vacuum de-air is recommended to get better thermal conductivity.Pour the mixture onto the container directly, avoid airentrapment. The catalysed material would cure to a flexible rubber within 24 hour at room temperature and then the mould can beremoved. If the work temperature is significantly low, the cure time would be longer. Heat accelerating the cure is possible.
Inhibition of cure
All addition-cured silicone elastomers are suspect to cure inhibition when contact with certain materials and chemicals.Inhibition has occurs if the elastomer is only partly cured after 24 hours or has a sticky surface in contact with anothermaterial. Amines and sulphur-containing materials are strong inhibitors, as are organ tin salts used in condensation curesilicone elastomers.
■ Packaging
Base A: 20kg/barrel, Curing agent B: 20kg/barrel
■ Usable life and storage
Base A and curing agent B has a shelf life of 12 months from the date of manufacture.
Send product request
Other supplier products
 |
Injecting silicone rubber keyboard for computer application | This product adopts high performance silicon rubber as the raw material, adopting injection molding process. Features and Benefits: Excellent trans... |
 |
1.0-7.0 W/m·K silicone Thermal putty for heat sink computer services | Product Features Bornsun's BN-PN series (thermal putty) are mud-like thermal materials whose form is between thermal pad and thermal grease. Therma... |
 |
NFC silicone wristband watch for smart bracelet | This product adopts high performance silicon rubber as the raw material, adopting hot-pressing and injection molding process. It can provide custom... |
 |
Liquid injecting Silicone bracelet for Smartwatch application | This product adopts high performance silicon rubber as the raw material, adopting hot-pressing and injection molding process. It can provide custom... |
 |
BMC electrical Insulator for power cabinet application | RoHs compliance: Yes Benefits Excellent compressive property: 10KV/mm Excellent tensile property:>3.2KN Heat deflection temperature: 260℃ Good ... |
Same products
 |
Foil Surface Pipe Insulation | Seller: Langfang Clear Chemical Building Materials Co., Ltd | When it comes to choosinghigh-performance insulation for pipesin commercial, industrial, or resid... |
 |
Phenolic Foam Ductwork | Seller: Langfang Clear Chemical Building Materials Co., Ltd | Phenolic foam ductworkis a lightweight duct system that combines phenolic foam's excellent insula... |
 |
Pre-insulated Phenolic Duct Board | Seller: Langfang Clear Chemical Building Materials Co., Ltd | Pre-insulated phenolic duct boardis a next-generation HVAC ducting solution that combines thermal... |
 |
YCS S-550A Oversized Thickened Insulation Pad for Tin Plating | Seller: ShenZhen VIP FIXPHONE Technology Co., Ltd, | Description YCS Tin-planted ARC Pad Silicone Mat with 0.4mm 0.5mm 0.8mm Slot for mobile ... |
 |
Phenolic Paper Laminated Sheet | Seller: Xuchang Yongteng Insulation Material Co., Ltd | The product is made of an insulating impregnated paper soaked with phenolic resin, through baking... |
