air box dust collector/duster
Structure and working principle:
Air box pulse bag filter dust collector is composed of shell (usually 5mm carbon steel plate welded), bracket and pulse cleaning system, ash bucket, ash discharge device and other components. When the dust-laden gas enters the PPC air box pulse bag filter from the air inlet, it first hits the inclined baffle in the middle of the air inlet and the air flow turns into the ash hopper. At the same time, the air speed becomes slower, and the coarse particles in the gas are caused by the inertia. Dust directly falls into the ash hopper and plays the role of pre-collecting dust. After entering the ash hopper, the airflow is folded upward and passes through the dust bag inside the metal dust-removing frame. The dust is trapped on the outer surface of the filter bag, and the purified gas enters. The clean room in the upper part of the baghouse is collected and discharged to the outlet pipe. The discharged clean air completely meets the national requirements for emission standards, with a filtration efficiency of 99.99%. The CPPC airbag pulse bag filter is currently the dust removal equipment with the highest dust removal efficiency in the country.
Air box pulse bag filter dust collector products include a total of 33 kinds of specifications, each bag has 32,64,96,128 bags of four, dust bag length of 2450mm and 3060mm two, dust collection efficiency of up to 99.9%, after purification The concentration of dust in the gas is less than 100mg/m3 (standard). If this series of dust collectors is used in cold areas, a heating device shall be provided when the outdoor heating calculation temperature is ≤ -25°C.
Air box pulse bag filter dust collector is generally operated under negative pressure, but it can also work under positive pressure, and the structure does not need to be changed.
Air box pulse bag filter dust collector on the filter bag stoppage and injection time, the interval between the compartments, cleaning cycle by the program control instrument to control, the time is adjustable.
Features:
collector adopts chambers to clean the dust in turn, which is called off-line cleaning. When a room is blown and cleaned, the filtered air stream is cut off, which prevents the dust from flying and dusting to fly twice. Therefore, the PPC airbag pulse bag dust collector can trap gas with a dust concentration of up to 1000g/m3. This series of products can be widely used in the crushing installation of cement plants, storage roofs, cooked cooling machines, and mill dust collection systems.
If you need, please feel free to contactMiss. Livia
Email: />Whatsapp (
livia1332642195
/>Company: Xinxiang Lifeierte Filter Corp., LTD
Web in English:
Send product request
Other supplier products
 |
Environment Friendly Tyre Pyrolysis Recycling Machinery To Make Diesel | Working principle:First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor wil... |
 |
The Lowest Price Mini air box pulse bag filter | Structure and working principle: Air box pulse bag filter dust collector is composed of shell (usually 5mm carbon steel plate welded), bracket and... |
 |
PECO Facet coalescer cartridge filter | INTRODUCTION: Facet CAA Series 5 coalescer cartridges offer the finest performance available. This standard line of high flow coalescer cartridges... |
 |
Stainless Steel basket strainer basket type filter | INTRODUCTION: Basket filter is piped to remove solid impurities in the process of the equipment. Liquid flow through the basket filter, then th... |
 |
Cast Iron Basket T Strainer | INTRODUCTION: Basket filter is piped to remove solid impurities in the process of the equipment. Liquid flow through the basket filter, then th... |
Same products
 |
Propane Refill Adapter | Seller: Dong Guan ABYDA Gas Valve Co., Ltd | Product Specification:1. Raw Material: High solid brass;2. Inlet: QCC; Outlet: 1"-20 Female throw... |
 |
SUNLORD inductor 10UH 20% 7.8A 10 x 11.5 x 4MM instead IHLP4040DZER100M01 FIXO 10UH 6.8A 36.5 MOHM | Seller: ZK Electronic Technology Co., Limited | Part name: 10UH 20% 7.8A 10 x 11.5 x 4MM Description:SUNLORD inductor 10UH 20% 7.8A 10 x 11.5 x ... |
 |
SRR1240-680M INDUTOR POWER 68UH 1.5A SMD BOURNS | Seller: ZK Electronic Technology Co., Limited | Part name: SRR1240-680M Description:SRR1240-680M INDUTOR POWER 68UH 1.5A SMD BOURNS Inductance:... |
 |
SMD Common Mode Inductor ACM7060-701-2PL-TL01 ACM7060 TDK | Seller: ZK Electronic Technology Co., Limited | Part name: ACM7060-701-2PL-TL Description:SMD Common Mode Inductor ACM7060-701-2PL-TL01 ACM7060 ... |
 |
Inductor beads BLM15AG121SN1D MURATA SMD | Seller: ZK Electronic Technology Co., Limited | Part name: BLM15AG121SN1D Description:Inductor beads BLM15AG121SN1D MURATA SMD Inductance: / C... |
