Ignition Switches
The vehicle ignition starter switchis the switch of the automotive ignition system, usually requires a key to freely open or close the main circuit of the ignition coil. After the key is inserted into the ignition switch, stay in each gear for about 1 or 2 seconds for an instant, at this time, will hear the sound of the electrical equipment being powered on, and then enter the next gear. Some vehicles can directly enter the ON position, and then wait for about 6-7 seconds after all aspects of the electrical appliances are fully activated, and then turn the key to the START state to start the ignition directly.
Key Features of Ignition Switches
- ignition switch and keyis generally placed in this gear, which is equivalent to locking the steering wheel. The steering wheel cannot have too much movement at this state.
How To Test Ignition Switches?
The ignition switch is the most important switch in the automotive circuit. It is the control hub of each circuit branch and can freely turn on or off the ignition coil. If the ignition switch is faulty, the car cannot start normally. The most direct symptom is that the ignition cannot be ignited, cannot be turned off or turned off for unknown reasons, even the circuit regulated by the key cannot be used normally.
Poor starting habits, such as inserting the key into the ignition switch, and turning directly from the parking position to the ignition position, will cause great damage to the ignition switch. Because the four gears of the ignition switch are progressive, the purpose is to make the electrical equipment enter the working state one by one, so as to relieve the burden of the vehicle battery caused by the instantaneous power-on. If you don't stop in other gears when you start the vehicle, the load of the battery will be added instantly, which is basically very harmful to the battery and the engine. In the long run, it will reduce the life of the battery and cause the engine to be difficult. start.
Therefore, a good starting habit is to slowly turn the key, let the electrical accessories on the vehicle enter the state one by one, and relieve the power supply pressure of the battery. Every step of starting the vehicle according to the normal process, the vehicle will have a good starting state.
For more information about ignition switch wireand ignition switch price, please feel free to contact us!
If you need any kinds of auto spares, please contact us, as a professional auto spare parts supplier, MAPMS is willing to offer you high quality products.
Send product request
Other supplier products
| Cabin Filters Application | automotive parts industry/ automobile parts manufacturing industry/ industry auto parts The cabin filter filters the air in the car compartmen... | |
| Ignition Coil Rubber Boots | MAPMS supplies car rubber boots for COP and pencil ignition coils, which is made of high-quality silicone, and with withstand high pressure over 40... | |
| Oil Pressure Sensors | Automotive Oil Pressure Sensor is an important device to detect the oil pressure of a vehicle engines. The detected data helps to control engine's ... | |
| Crankshaft Position Sensors | The car crankshaft sensordetermines the position of crankshaft, that is, the angle of crankshaft and engine speed. It usually works together with c... | |
| Automotive Sensors | Sensor for automotiveis the input device of automotive computer system. It converts information of various working conditions, such as vehicle spee... |
Same products
| China supplier Differential pressure transmitter RCA218MZ090Z power plant | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | China supplier Differential pressure transmitter RCA218MZ090Z power plant spare parts Dongfang Yo... | |
| High Voltage 630A 12kv Outdoor Horizontal Type Disconnect Switch Interrupter Disconnector | Seller: 854155 | These disconnectors are , no load switching devices which physically isolate the lines. They are... | |
| Single-Pole 17.5kv 600A Disconnect Switch Isolator | Seller: 854155 | Single Pole Switch Isolator, 22kV, 800/630A1.0 GeneralThe single pole switch isolator are used fo... | |
| HS-6 wireless REMOTE CONTROL Tail Lift | Seller: 790304 | HS-6 Industrial remote control system1 set includes transmitter and receiverTechnical DataOuter S... | |
| STSH2 Type Servo Straight Side Double Points High Precision Press | Seller: Suzhou S-T Intelligence Technology Co., Ltd | Main motor is Low Speed High Torque Servo Motor Brand: S-T Intelligence Servo Drive & Contr... |
















