10Gbps XENPAK-ER Optical Transceiver
10Gbps XENPAK-EROptical Transceiver
Features:
Compliant with XENPAK MSA；
1550nm Cooled EA-DFB and PIN-PD ；
SC duplex receptacle package；
XAUI electrical interface 4 x 3.125 Gb/s Ethernet；
Management and control with MDIO 2-wire bus；
Power supply: +5.0 V, +3.3 V, APS:+1.2 V；
Power Dissipation 3.5W Maximum；
Diagnostic Optics Monitoring；
Compliant with RoHS;
Temperature Range: 0~ 70 °C
Application:
10 Gb/s Ethernet transmission systems
Regulatory Compliance:
|
Feature |
Standard |
Performance |
|
Electrostatic Discharge (ESD) Tothe Electrical Pins |
MIL-STD-883E Method 3015.7 |
Class 1C(>1000 V) |
|
Electromagnetic Interference(EMI) |
FCC Part 15 Class B EN55022:2006 CISPR 22B :2006 VCCI Class B |
Compliant with standards Noise frequency range: 30 MHz to 6 GHz. Good system EMI design practice required to achieve Class B margins. System margins depend on customer host board and chassis design. |
|
Electrostatic Discharge to theenclosure |
EN 55024:1998+A1+A2 IEC-61000-4-2；GR-1089-CORE |
Compatible with standards |
|
Immunity |
EN 55024:1998+A1+A2 IEC 61000-4-3 |
Compliant with standards. 1kHz sine-wave, 80% AM, from 80 MHz to 1 GHz. No effect on transmitter/receiver performance is detectable between these limits. |
|
Laser Eye Safety |
FDA 21CFR 1040.10 and 1040.11 EN60950, EN (IEC) 60825-1,2 |
CDRH compliant and Class I laser |
Send product request
Other supplier products
 |
Outdoor Optical Fiber Cable Standard Loose Tube Armored Cable | Outdoor Optical Fiber Cable Standard Loose Tube Armored Cable Feature: Steel wire strength.filler protect tube fiber.steel tape armord; Good ultra ... |
 |
Indoor Optical Fiber Cable Duplex Flat Fiber Cable | Feature:Two single-fiber as basic unit , flat twin configuration;Single-cable with independent strength member;Tight buffer(900um or 600um).Applica... |
 |
Media Converter SFP to 10/100/1000Base-Tx | Media Converter SFP to 10/100/1000Base-Tx Application: Gigabit adaptive backward compatible with 10M, 100M, 10 / 100M equipment Supports 1000Base-T... |
 |
Indoor Optical Fiber Cable Self-supporting FTTH Fiber Cable | Indoor Optical Fiber Cable Self-supportingFTTH Fiber Cable Feature: Adopt fiber with small bending radius (G.657), offering good bending resistan... |
 |
Fiber Optic Polishing | Fiber Optic Polishing For use in Fiber Optic (Ferrule) Grinding and Polishing Product specification: New Version: 66XC，66HPL，66HPX，66P ，5"(127mm) ... |
Same products
 |
GJS-D021 Dome Fiber Optic Splice Closure | Seller: "Shanghai Grandway Telecom Tech.Co.,Ltd. | Functions Type D021 dome closure fiber opticcan be used for aerial,underground, pipeline and wal... |
 |
GJS-D010 Dome Fiber Optic Splice Closure | Seller: "Shanghai Grandway Telecom Tech.Co.,Ltd. | GJS-D010 Dome Fiber Closure Functions Type D010 fiber optic splice enclosurecan be used for a... |
 |
Indoor FTTH Drop Cable | Seller: "Shanghai Grandway Telecom Tech.Co.,Ltd. | Functions With the development of fiber optic communication, FTTH has been the final solution of... |
 |
F2H-OTB-A Series Indoor Optical Termination Box | Seller: "Shanghai Grandway Telecom Tech.Co.,Ltd. | Functions F2H-OTB-A Series indoor fiber termination boxis used as terminal equipment of otb fibe... |
 |
F2H-FOSC-ODP Fiber Optic Splice & Splitter Closure | Seller: "Shanghai Grandway Telecom Tech.Co.,Ltd. | Functions F2H-FOSC-ODP Fiber Optic Splice & Splitter Closure applies vented structure and me... |
