10Gbps XENPAK-ZR Optical Transceiver
10Gbps XENPAK-ZROptical Transceiver
Features:
Compliant with XENPAK MSA;
1550nm Cooled EA-DFB and APD-PD ；
SC duplex receptacle package；
XAUI electrical interface 4 x 3.125 Gb/s Ethernet；
Management and control with MDIO 2-wire bus；
Power supply: +5.0 V, +3.3 V, APS:+1.2 V；
Power Dissipation 3.5W Maximum；
Diagnostic Optics Monitoring；
Compliant with RoHS;
Temperature Range: 0~ 70 °C
Application:
10 Gb/s Ethernet transmission systems
Regulatory Compliance:
|
Feature |
Standard |
Performance |
|
Electrostatic Discharge (ESD) Tothe Electrical Pins |
MIL-STD-883E Method 3015.7 |
Class 1C(>1000 V) |
|
Electromagnetic Interference(EMI) |
FCC Part 15 Class B EN55022:2006 CISPR 22B :2006 VCCI Class B |
Compliant with standards Noise frequency range: 30 MHz to 6 GHz. Good system EMI design practice required to achieve Class B margins. System margins depend on customer host board and chassis design. |
|
Electrostatic Discharge to theenclosure |
EN 55024:1998+A1+A2 IEC-61000-4-2；GR-1089-CORE |
Compatible with standards |
|
Immunity |
EN 55024:1998+A1+A2 IEC 61000-4-3 |
Compliant with standards. 1kHz sine-wave, 80% AM, from 80 MHz to 1 GHz. No effect on transmitter/receiver performance is detectable between these limits. |
|
Laser Eye Safety |
FDA 21CFR 1040.10 and 1040.11 EN60950, EN (IEC) 60825-1,2 |
CDRH compliant and Class I laser |
Send product request
Other supplier products
 |
Indoor Optical Fiber Cable Duplex Zipcord Fiber Cable | Feature: High tensile strength due to aramid strength member; Good flame retardant properties； Stable temperature performance； Excellent stripabili... |
 |
Fiber Optic Polishing | Fiber Optic Polishing For use in Fiber Optic (Ferrule) Grinding and Polishing Product specification: New Version: 66XC，66HPL，66HPX，66P ，5"(127mm)... |
 |
FBT Optical Coupler | FBT Optical Coupler Features: Low insertion loss, low PDL High credibility and stability Industry standard and custom housing available Various co... |
 |
Indoor Optical Fiber Cable Ribbon Flat Fiber Cable | Indoor Optical Fiber Cable Ribbon Flat Fiber Cable Feature: High tensile strength due to aramid strength member； Compact structure, higher fiberd... |
 |
XFP-10G-ER 10Gbps XFP Optical Transceiver | XFP-10G-ER 10GbpsXFP Optical Transceiver Features: Supports 9.95Gb/s to 11.3Gb/s Bit Rates； Hot-pluggable XFP Footprint； Maximum Link Length up ... |
Same products
 |
SC/UPC SM Connector | Seller: Shenzhen Puhuixin Tecnhnology Co., Ltd. | SM/SCFiber Connector Definition PHX design, develop molds and produce various of kinds of Single... |
 |
Sc Fiber Optic Adapter | Seller: Shenzhen Puhuixin Tecnhnology Co., Ltd. | SCFiber Adapter A fiber optic adapter also called a coupler, is a small device designed to termi... |
 |
SC Auto Shutter Connector And Adapter | Seller: Shenzhen Puhuixin Tecnhnology Co., Ltd. | SC Auto Shutter Connector And Adapter SCapc fast connectorfeatures low insertion loss and added ... |
 |
SC Attenuator | Seller: Shenzhen Puhuixin Tecnhnology Co., Ltd. | SC Attenuator Applied to SC-APC optical fiber interface, SC interface and RJ-45 interface look s... |
 |
Remote Optical Fiber Cable | Seller: Shenzhen Puhuixin Tecnhnology Co., Ltd. | Remote Optical Fiber Cable Remote outdoor multimode fiber optic cableis made by placing a layer ... |
