Industrial Electrostatic Precipitator For CNC Lathe
SPECIFICATIONS
Overall dimension
L550mm,Website:
Power Consumption
180w
Flange Diameter
100mm
Cabinet
1.0mm thick welded stainless steel sheet
Airflow rate
300CMH
Power supply
220V/AC /50Hz/3PH
Noise
68db
Finish
High Bake Epoxy Powder
Static Power
50w
Purification efficiency
99.2%
Particle density
1000 mg/m3
Empty weight
30kg
Airflow
Horizontal. Right/Left or Left/Right
Installation
Free standing, wall or frame mounted
Electrical Connection
Direct to junction box on unit
Pre-/after-filter
Washable aluminum mesh
Controls
On/Off Switch with operating light
Electric Field
Spiked design; aluminum/stainless steel blades
Insulators
Teflon
Voltage
Ionizer-13kv/Collector-6.5kv
CASP's ASG300 Air Purifier is a professionally designed and well produced filtration and purification unit, which requires no filtration media replacement". The purifier features tri-step filtration and purification: First a metal mesh pre-filtrating the big size contamination; Second: a master purification unit ionizing and collecting micro-particles with minimum size 0.01 M and the efficiency up to 99.9%; Third: an active carbon filtration as the odor-eliminator. Air flow are sucked by the single-Phase turbo fan that is rationally built-in. Casings are constructed of high-quality mild steel and powder-coated (custom colors available).
The ASG300 also includes all Hi-Voltage power supplier, circuit-breaker, motor cut-out, electric parts and 2m long cable with plug. ASG300 is perfect for extracting fumes, oil-mist, gases, and light, dry dusts. Application includes metal-processing lathe (common and CNC), soldering and other contaminating area. The ASG3000 air purifier is easy to install and fix on the machine, custom designs according to different working situations and applications are available.
HOW IT WORKS:
Contaminated air is drawn by the motor/blower through a washable metal mesh pre-filter, which traps large dust particles. The remaining particles, some as small as 0.01 microns, pass into a strong electrical field (12.5kv-13kv) (ionizing section) where the particulate receives an electrical charge. The charged particles then pass into a collector plate section made up of a series of equally spaced parallel plates. Each alternate plate is charged with the same polarity (6kv-7kv) (collecting section) as the particles, which repel, while the interleaving plates are grounded, which attract and collect the contaminants. The contaminants are held in these plates until they are washed away. Electronic Air Cleaners traps both wet and dry particulates.
Features:
Solid state power supply
Electrical component box mounted out of air stream
Motor HP options for added static pressure
Teflon insulators out of air stream for increased reliability
Spiked ionizer no ionizing wires to replace, reducing maintenance and replacement cost
High efficiency up to 95% on single pass and 99% on double pass option
Permanent ionizer/collector elements no filter replacement cost; just wash, dry and reinstall
Low pressure drop lower energy cost to operate compared to media and cartridge units
Hinged access no tools required for quick and easy service
Applications:
OUR WORKSHOP & EQUIPMENT
OUR OFFICE BUILDING:
Other supplier products
All supplier products
Same products
