SMD Shielded Inductor
Providing with quality and standard customer-made electronic and passive components smd shielded inductor and solution products, Fullstar Electronics is a leading smd shielded inductor manufacturer and supplier in China. welcome to wholesale electronics low profile smd inductor, low resistance smd power inductor, low dcr smd power inductor, high-current smd shielded inductor, magnetic shielded surface mount inductor from our factory.
SMD SHIELDED INDUCTORFeatures : Low Profile SMD Power Chip Inductor with Low Resistance and 1 to 1,200uH InductanceLow DCR SMD power inductorLarge-current SMD power inductor SMD magnetically shield power inductorShielded SMD power chip inductorMagnetic shielded surface mount inductor with high current ratingLow profile and shielded very effective in space-conscious applicationsLow resistance to deep power loss minimum
Temperature rise: 40 degree Celsius maximum
Rated current: base on temperature rise and L/LOA: 15%maximumOperating temperature: -40 to 105°C (contain heating coil)
Storage temperature: -40 to +125 degree CelsiusAppearance inspection: no external defect by visual inspectionTerminal strength: after soldering, between copper plate and terminals of coil, push in two directions of X, Y with standing as below conditionsTerminal should not peeled offHeat endurance of reflow soldering: 240Insulating resistance: over 100MΩ at 100V DC between wire and coreDielectric strength: no dielectric breakdown at 100V DC for one minute between wire and coreTemperature characteristic: inductance coefficient (0 to 2,000) x 10-6/(-25 to 80°C) inductance deviation within ±5.0%, after 96 hoursHumidity characteristic: in 90 to 95% relative humidity at 40 ± 2 and one hour drying under normal condition Inductance deviation within ±5.0% after vibration for one hourVibration resistance: in each of three orientations at sweep vibration (10/55/10Hz) with 1.5mmp-p amplitude
Materials:
Core: ferrite DR core or ferrite RI core
Wire: enameled copper wire (class F)
Adhesive: epoxy resin
Terminal: Ag, Ni, and Sn
APPLICATIONS: DC/DC converters for Portable equipments (MP3 Mpeg4).AV equipments (DVCs .LCD TV .Digital cameras) Mobile Computer (PDAs , Notebook) ,Small size communication,Equipments (Mobile ) etc…
VTR , OA Equipment , Camcorder , TV Game , LCD Television Set
Package : Tape and Reel
Fullstar Type Series : PIS-S series , SRHA Series , SRHB Series PRS-S Series
Other supplier products
|
Ferrite Core |
Providing with quality and standard customer-made electronic and passive components ferrite core and solution products, Fullstar Electronics i... |
|
No Inductor High Voltage Composition Resistor |
Providing with quality and standard customer-made electronic and passive components no inductor high voltage composition resistor and solution... |
|
High-frequency Current Transformers |
Providing with quality and standard customer-made electronic and passive components high-frequency current transformers and solution products, Full... |
|
Through-hole Axial Conformal Coated Inductors |
Providing with quality and standard customer-made electronic and passive components through-hole axial conformal coated inductors and solution... |
|
Switching Transformer |
Providing with quality and standard customer-made electronic and passive components switching transformer and solution products, Fullstar Elec... |
All supplier products
Same products