12V AGM High Performance Lead Acid Battery
NP2.2-12 (12V2.2Ah/20hr)The rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid electrolyte is absorbed by separators and thus immobilized. Should the battery be accidentally overcharged producing bydrogen and oxygen, Special one-way valves allow the gases to escape thus avoiding excessive pressure build-up. Otherwise, the battery is completely sealed and is, therefore, maintenance-free, leak proof and usable in any position.Battery ConstructionComponentPositive plateNegative plateContainerCoverSafety ValveTerminalSeparatorElectrolyteRaw materialLead DioxideLeadABSABSRubberCopperFiberglassSulfuric AcidGeneral Feature●Absorbent Glass Mat(AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance or water adding.●Not restricted for air transport-complies with IATA/ICAO Special Provision A67.●UL-recognized component.●Can be mounted in any orientation. Computer designed lead, calcium tin alloy grid for high power density.●Long service life, float or cyclic applications.●Maintenance-free operation.●Low self discharge.SPECIFICATIONNominal voltageVNumber of cell 6Length(mm/inch 178/7.01Width(mm/inch) 35/1.38Height(mm/inch 61/2.4 Total Height(mm/inch) 67/2.64 Approx. Weight(kg/lbs) 0.80/1.76 Performance CharacteristicsCapacity77°F(25℃)20 hour rate (0.115A, 10.8V )2.2Ah10 hour rate (0.20A, 10.5V)2.0Ah5 hour rate (0.39A, 10.5V)1.95Ah1 hour rate (1.46A, 9.6V)1.46AhInternal ResistanceFull charged Battery 77°F(25℃): 65mΩCapacity affected byTemperature(20hour rate)104℉ (40℃)102%77 ℉ (25℃)100%32 ℉ (10℃)85%5 ℉ (-15℃)65%Self-discharge68℉ (20℃)Capacity after 3 months storage90%Capacity after 6 months storage80%Capacity after 12 months storage60%Max. discharge current77℉(25℃): 34.5A(5S)Charge(ConstantVoltage)Float: 13.6~13.8V / 77℉(25℃)Cycle: 14.50~14.90V / 77℉(25℃)Max. Current：0.57ADischarge Constant Current (Amperes at 77℉ 25℃)End Point Vlots/Cell5min10min15min30min1h3h5h10h20h1.60V9.005.704.402.501.460.590.410.230.1251.65V8.645.474.272.411.380.570.400.220.1201.70V8.275.234.132.291.290.540.390.210.1201.75V7.894.983.982.161.190.490.370.200.1151.80V7.504.723.822.021.080.450.340.180.105Discharge Constant Power (Watts at 77℉ 25℃)End Point Vlots/Cell5min10min15min30min45min1h2h3h5h1.60V17.51108.504.833.502.781.541.080.751.65V16.710.58.144.523.382.461.451.040.741.70V16.010.07.864.283.252.281.350.980.731.75V15.309.467.564.023.112.091.140.930.711.80V14.48.947.243.743.001.861.020.840.62(Note)The above characteristics data are average values obtained within three charge/discharge cycles not the minimum values.
Other supplier products
|
|
Ups Battery Supply Company |
NP12-6(6V12Ah)GENERAL FEATURES●Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom form electrolyte for... |
|
|
Cr2032 Battery |
LEADHOO is one of the professional cr2032 battery manufacturers and suppliers in China which can offer you bulk cr2032 battery in stock. You are we... |
|
|
12V GEL Wind Power Battery |
NPG180-12 (12V180Ah/10hr)NPG Series is GEL battery which is manufactured with AGM separator and colloidalSilicon. Gel battery are featured with low... |
|
|
12V100Ah High Performance Solar Battery |
LEADHOO is one of the professional 12v100ah high performance solar battery manufacturers and suppliers in China which can offer you bulk 12v100ah h... |
|
|
12V Deep Cycle Battery For Solar |
NPD150-12 (12V150Ah/10hr) The rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid electrolyte is absorbed by separators ... |
All supplier products
Same products
