Multi-channels Charge Amplifier
Six Channel Charge Amplifier
Model YE5853
YE5853 charge amplifier is a kind of multi-channel modular charge amplifier, connecting with piezoelectric acceleration sensor as a test system, to measure the physical parameters, such as vibration, shock, be widely used in mechanical manufacture, power, aviation, navigation, construction, chemical explosion and other departments.This instrument adopts multi channel interpolation type structure, each instrument contain 1 ∽ 6 measurement channels, so for multipoint tests, it is a best economy choice.
Features:Rack-mounted multiple channel constructionSmall dimension with high integration designThree digit dial-in of transducer sensitivity (1~10pC/unit)Seven output gain settingsFive low-pass filter settingsLow noise and high accuracyWide frequency bandwidth (0.3 ~ 100kHz)Overload indicatorSpecifications:InputInput TypeSingle-endedInputCharge: ±105PC Maximum; Voltage: ±10VP MaximumExternal calibrationInput capacitance: 1000pf±0.5% ; Input voltage: 10Vpk Max.OutputOutput TypeSingle-endedOutput±10VP(DC-30kHz)/±100mATransfer CharacteristicsTransducer sensitivitySwitch Selectable from 1 to 10.99 PC/UnitGainSwitch Selectable 0.1; 0.3; 1; 3; 10; 30; 100; 3001000mV/pC with transducer capacitance 1nFAccuracy≤±1.5% with 20°C±2°, 45-75% RH, ≤±3% with 0°C-40°, 20-90% RH,Frequency responseLow pass filterSwitch selectable 1k, 3k, 10k, 30k, 100kHz (–3dB±1dB), 12dB/OctHigh pass filter0.3Hz (–3dB±1dB), –6dB/OctNoise≤5μV referred to input with maximum sensitivityHarmonic Distortion<1% at 10kHz, with 10nF capacitive load and full-amplitude outputOverload displayLED on when output exceeds |±10| VEnvironmentalTemperatureOperating: 0°C-40°C; Storage: -55°C-85°CHumidityMaximum 95%R.H.Power supplyPower sourceDC: ±18~±27V, 500mA; AC: 220V±10%, 50Hz, 0.3A Physical characteristicsDimensions236mm(W) × 132.5mm(H) × 300mm(D)WeightAbout 5.5kgConnectionInput: L5; ; Output: BNC;AccessoriesInput cableSix 2m double-head L5 STYV-1 low noise cableOutput cableSix 2m double-head BNC 50W output coaxial cablePower supply cableAC supply cable, DC supply cableFuse (0.2A)One
Other supplier products
|
|
IC Accelerometer |
IC( Integrated Circuit) Piezoelectric Accelerometer:These accelerometers are built in charge amplifier of double power or single-power supply,suita... |
|
|
General Vibration Shock Accelerometer |
General Vibration Shock Accelerometer Highlight:
The main sensing element Piezoelectric Ceramics are made by ourselves with good stability an... |
|
|
Deplacement Sensor |
Displacement Sensor(eddy current sensor)CWY-DO-Series proximity displacement transducer (eddy), based on the principle of the eddy current effect o... |
|
|
Professional Dynamic Data Acquisitions With Pre-Amplifiers |
YE6269 Dynamic Signal Test and Analysis System1.Introduction
YE6269 is a high performance dynamic signal test and analysis system with a wide r... |
|
|
High Accurancy Bimorph Actuator |
Piezoelectric ActuatorsBimorph actuators are made from a sandwiched pair of piezoelectric elements which can expand and contract in length. When us... |
All supplier products
Same products
