Latch Type Hall Sensor AH3075
Hall Sensor
Hall Switch
Features
Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V;
Operating temperature range: -55℃ ~ 150℃;
Rated output current(sink) : 25 mA, the maximum output current(sink): 50 mA;
Switch response time is about 1μs, the operating frequency DC ~ 100 kHz;
Small temperature drift between operating point and release point;
No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety;
Products meet the EU RoHS instruction 2011/65 / EU and REACH regulations 1907/2006 / EU requirements.
Hall sensor AH3075 is one of bipolar excitation single-ended digital output Hall IC. The output signal owns latch function. The sensor chip has built-in reverse voltage protection, voltage regulators, temperature compensation circuit, Hall-voltage generator, signal amplifier, Schmitt trigger, and open collector output driver circuit unit. Excellent voltage regulator and temperature compensation circuit ensure the sensor stable operates over a wide voltage range and temperature range, and the reverse voltage protection circuit avoids the sensor to be damaged by reverse voltage.
Send product request
Other supplier products
 |
Latch Type Hall Sensor AH4059 | Latch Type Hall SensorAH4059 Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operatin... |
 |
Micropower designing Omnipolar Hall Sensor AH3663 | Micropower designing Omnipolar Hall SensorAH3663 Hall Sensor Hall Switch Features Micropower designing; Rated supply voltage 2.4 V ~... |
 |
Latch Type Hall SensorAH3051 | by reverse voltage.Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operating temperatu... |
 |
Linear Hall Sensor AH496B | Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 10 V;, Operating temperature range: -40℃ ~ 125℃; Rail to Rail voltage output, ... |
 |
Unipolar Hall Sensor AH543 | Unipolar Hall Sensor AH543 Featuresabout our Micropower Hall Sensor Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operati... |
Same products
 |
50DC Hermetically sealed Filter | Seller: Fuzhou LCA Electronic Technology Co,ltd | Place of Origin：Fujian, China Brand Name：LCA Model Number：HB2020-001 Descrip... |
 |
Resin Sealed Bolt-in Filters(Special) | Seller: Fuzhou LCA Electronic Technology Co,ltd | Place of Origin：Fujian, China Brand Name：LCA Model Number：L6050-001 Descript... |
 |
M2.5 M3 M4 Threaded feedthrough capacitor filter | Seller: Fuzhou LCA Electronic Technology Co,ltd | These filters are easily mounted in a tapped hole or thru-hole with supplied nut and lock-washer.... |
 |
Hangzhi CAFR-A-NP Series PCB Current sensor | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | The CAFR-A-NP series is a current sensor developed by Hangzhi that can be soldered on the PCB cir... |
 |
Hangzhi CIT High Precision Split Core current transducer | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | The CIT series high precision split core current transducer is developed by Hangzhi based on the ... |
