Dichroic Filter
Hyperion Optics’s complete range of cost effective dichroic filterrange offers superior transmission, reflection and absorption characteristics.
Key Features:
Sharp transition from reflection to transmission
High transmission in pass band
Hard coatings and no adhesives for long filter life span
All dielectric coated with IBS technology
Factory Standard – Contact us for manufacturing limit or custom specifications
Angle of Incidence: 45.0°
Shortpass Type Transmittance: Tabs>85%
Dimensions: 25.2mm*35.6mm*1.1 mm
Clear Aperture: >95%
Operating Temperature: -45°C ~ 85°C
Physical Durability: MIL-C-48497A
Longpass Type Transmittance: Tabs>90%
Reflection Band: Rabs>98%
Thickness Tolerance: ±0.1 mm
Transmitted Wavefront: 1/4λRMS@633nm (per inch)
Environmental Durability: MIL-STD-810F
Substrate: UV Grade Fused Silica
Dichroic optical filters consist of thin film dielectric coatings on glass and exhibit sharp transitions between transmitted and reflected wavelengths. Dichroic filters are similar to traditional interference filters but differentiate themselves by reflecting all unwanted wavelengths. Consequently our dichroic range also offers minimal absorbance characteristics.
Our dichroic filters are available in longpass, shortpass, bandpass, bandblocking and colour correction types over a range of wavelengths. Dichroic shortpass and longpass filters can also act as hot and cold mirrors respectively.
Dichroic filters can divide natural light from a certain wavelength into two parts, one of which passes through, and the other is reflected or absorbed. Filters that allow longer wavelengths of light to pass through are referred to as long wave pass filters, and filters that allow shorter wavelengths of light to pass through are referred to as short wave pass filters.
The desired spectral range can be achieved by using different dichroic filters.
For more information about optical design manufacturing, please feel free to contact us!
Send product request
Other supplier products
| Magnesium Fluoride Lenses | CVD magnesium fluoride (MgF2-CVD) has good mechanical properties, chemical stability, impact resistance, great anti thermal fluctuations and radiat... | |
| Beam Expander | Beam expansionor reduction is a common application requirement in most labs using lasers or light sources and optics. Users always find there are s... | |
| Elliptical Mirror | Elliptical mirroris still a flat mirror, but the shape is cut into an oval, and the outer circle and the mirror into a 45 ° angle. When the ell... | |
| Chalcogenide Lenses | Chalcogenide glass is containing one or more chalcogens (sulfur, selenium and tellurium, but excluding oxygen). Chalcogenide components are becomin... | |
| Cold & Hot Mirror | Heat mirrors and cold mirrors are specialthat can reflect infrared light and ultraviolet light and only allow visible light to pass through, also k... |
















