AC Input Microwave Motion Sensor - Highbay Version
AC Input Microwave Motion Sensor - Highbay Version
AC Input Microwave Motion Sensors
Microwave Motion Sensors AC Input
HNS203HB
Operating voltage: 120~277V AC, 50/60Hz.
Rated load: 400W @ 120VAC, (capacitive)
Features
Operating voltage: 120~277V AC, 50/60Hz.
Rated load: 400W @ 120VAC, (capacitive)
800W @ 200~277VAC, (capacitive)
Stand-by power: ＜1w.
Dual-PD technology, real Daylight monitoring function for built-in application.
Zero-cross point operation, protect the sensor relay against the in-rush current, secure the max. load and life time of the relay .
Detection range up to 18m in diameter.
Mounting height: 10~12m.
Operation temperature:-20℃+70℃
RoHS compliant.
IP rating: IP20.
Setting
Detection range
Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application.
Hold-time
Hold-time means the time period to keep the lamp on 100% after motion detected.
*when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range.
In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off.
Daylight sensor
Daylight sensor means the daylight threshold to enable or disable the sensor function.
"Disable":The sensor works always, even during daylight.
"50lux": The sensor works only in twilight.
"10lux, 2lux": The sensor works only in the dark.
Stand-by period
This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people.
"+∝" : means bi-level dimming control, the fixture never switch off.
Stand-by dimming level
This is the dimmed low light level you would like to have after the hold-time in the absence of people.
*0% means on/off control.
10%--Vdim=1.5Vdc 30%--Vdim=3.0Vdc50%--Vdim=5.0Vdc
Send product request
Other supplier products
 |
Standard Motion Sensor Module | DC Input Motion Sensor Module Standard Motion Sensor Module 5V/12V DC Input Microwave Motion Sensor - Standard Version HNS101D Input voltage 12... |
 |
Microwave Motion Sensor Antenna Module | Microwave Motion Sensor Antenna Module Microwave Sensor Microwave Motion Sensor HNM01 Low cost. Patch antenna, antenna gain: 2 dBi. Beam aper... |
 |
Highbay Version AC Input Microwave Motion Sensor | AC Input Microwave Motion Sensor - Highbay Version AC Input Microwave Motion Sensors Microwave Motion Sensors AC Input HNS203HB Operating volta... |
 |
AC Input Microwave Motion Sensors | AC Input Microwave Motion Sensor - Standard Version AC Input Microwave Motion Sensors Microwave Motion Sensors AC Input HNS201 Operating voltag... |
 |
AC Input Microwave Motion Sensors | AC Input Microwave Motion Sensors Microwave Sensor AC Input AC Input Microwave Motion Sensor - Standard Version HNS203 Operating voltage: 120〜2... |
Same products
 |
China manufacturer đầu dò nhiệt độ Wrnk2-131 for power generation | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China manufacturer đầu dò nhiệt độ Wrnk2-131 for power generationYOYIK is a large number ... |
 |
Sensor TEP11X321809 for power station | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory Sensor đo nhiệt độ bồn dầu thủy lực TEP11X321809 for power station Yoyik is specia... |
 |
High Frequency Modules PL-M20 (110V) for thermal power | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China High Frequency Modules PL-M20 (110V) for thermal power plant The use of advanced t... |
 |
China supplier Dissolved Oxygen Secondary Display Instrument UDA2182-DB1-NN2-NN-N-0000-EE | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | China supplier Dissolved Oxygen Secondary Display Instrument UDA2182-DB1-NN2-NN-N-0000-EE power p... |
 |
China manufacturer Thermocouple WREKD2-04A for power generation | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China manufacturer Thermocouple WREKD2-04A for power generationis an exclusive product for power... |
