.

Micropower Omnipolar Hall Sensor AH3661

Micropower Omnipolar Hall SensorAH3661

Hall Sensor

Hall Switch

Features

Micropower designing;

Rated supply voltage 2.4 V ~ 5.5 V;

Omnipolar operating, no “N” or “S” pole in excitation magnetic field, high magnetic sensitivity, highly symmetry in positive and negative magnetic switch point;

Built-in dynamic imbalance voltage compensition circuit, high temperature stability, Small temperature drift in switch point, resistant to mechanical stress and thermal stress, the power consumption is only 8μW, when the power supply is 2.75V;

Products meet the EU RoHS instruction 2011/65 / EU and REACH regulations 1907/2006 / EU requirements.

AH3661 is a kind of high sensitivity omnipolar micropower Hall sensor. The special designing circuit enable the sensor has omnipolar (no “S” or “N” pole) magnetic field excitation function, excellent positive and negative switch symmetry, and bitty average power consumption current. When the magnet (no “S” or “N” pole) is closed to sensor(∣B∣≥∣Bop∣),the sensor outputs low level; when the magnet is far away from sensor ∣B∣≤∣Brp∣), the sensor outputs high level. Stable Hysteresis(Bhx =∣Bopx- Brpx∣)ensure the sensor’s stable switch status, the sensor’s magnetic and electric transfer characteristic curve is shown as the figure.



Send product request

To: Nanjing AH Electronic Science & Technology Co., Ltd.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Signal-Type Wiegand Sensor WG112
Signal-Type Wiegand Sensor WG112 WG112 Features No need the power supply when it works. Bipolar excitation working mode, the sensor outputs a pair of positive and negative e...
AH3144 Unipolar Type Hall Sensor 
AH3144 Unipolar Type Hall Sensor  AH3144 Features Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operating temperature range: -40℃ ~ 150℃; Rated output cu...
Linear Hall Sensor AH49E
Linear Hall Sensor AH49E Linear Hall Sensor AH49E Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 6.5 V;   Operating temperature range: -40℃ ~ 125℃; Rail to ...
Linear Hall Sensor AH3511
Linear Hall Sensor AH3511 Linear Hall Sensor AH3511 Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 6 V,; Operating temperature range: -40℃ ~ 125℃; Rail to Ra...
Unipolar Hall Sensor AH543
Unipolar Hall Sensor AH543 Featuresabout our Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operating temperature range: -40℃ ~ 150℃; Rated output ...
All supplier products

Same products

Hangzhi CAFR-A-NP Series PCB Current sensor
Hangzhi CAFR-A-NP Series PCB Current sensor Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd The CAFR-A-NP series is a current sensor developed by Hangzhi that can be soldered on the PCB cir...
Hangzhi CIT High Precision Split Core current transducer
Hangzhi CIT High Precision Split Core current transducer Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd The CIT series high precision split core current transducer is developed by Hangzhi based on the ...
BMS300 Automotive Current Sensor Transducer
BMS300 Automotive Current Sensor Transducer Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd BMS300 fluxgate transducer is made of an excitation magnetic ring and a control circuit. Under no...
AIT6000-SG High-Precision Current Sensor Transducer, Accuracy 50ppm
AIT6000-SG High-Precision Current Sensor Transducer, Accuracy 50ppm Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd AIT6000-SG has a high gain and measurement accuracy in the full bandwidth range, due to the appli...
DIT300-SG high-precision digital current sensor
DIT300-SG high-precision digital current sensor Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd Hangzhi DIT300-SG is a 300 Amp High Precision Digital Current Transducer with an accuracy of 200p...