.

Latch Type Hall Sensor AH3075

Latch Type Hall SensorAH3075

Hall Sensor

Hall Switch

Features

Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V;

Operating temperature range: -55℃ ~ 150℃;

Rated output current(sink) : 25 mA, the maximum output current(sink): 50 mA;

Switch response time is about 1μs, the operating frequency DC ~ 100 kHz;

Small temperature drift between operating point and release point;

No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety;

Products meet the EU RoHS instruction 2011/65 / EU and REACH regulations 1907/2006 / EU requirements.

Hall sensor AH3075 is one of bipolar excitation single-ended digital output Hall IC. The output signal owns latch function. The sensor chip has built-in reverse voltage protection, voltage regulators, temperature compensation circuit, Hall-voltage generator, signal amplifier, Schmitt trigger, and open collector output driver circuit unit. Excellent voltage regulator and temperature compensation circuit ensure the sensor stable operates over a wide voltage range and temperature range, and the reverse voltage protection circuit avoids the sensor to be damaged by reverse voltage.



Send product request

To: Nanjing AH Electronic Science & Technology Co., Ltd.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Linear Hall effect sensors
Linear Hall effect sensors will pass linear area /nonlinear area/ saturation area during the magnetic induction increases. When there is no magnetic field that applies in se...
Linear Hall Sensor AH3507
Linear Hall Sensor AH3507 AH3507 Features Rated working voltage 4.5 V ~ 6 V; Operating temperature range: -40℃ ~ 125℃; Rail to Rail voltage output, Rated output current : ...
AH3144 Hall Sensor
AH3144 Hall Sensor Outline When the “S” pole of magnet faces the mark surface of the sensor and is closed to sensor (B≥Bop),the sensor outputs low lev...
Latch Type Hall Sensor AH3031
Latch Type Hall Sensor AH3031 Latch Type Hall SensorAH3031 Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operating tem...
Linear Hall Sensor AH3511
Linear Hall Sensor AH3511 Linear Hall Sensor AH3511 Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 6 V,; Operating temperature range: -40℃ ~ 125℃; Rail to Ra...
All supplier products

Same products

Hangzhi CAFR-A-NP Series PCB Current sensor
Hangzhi CAFR-A-NP Series PCB Current sensor Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd The CAFR-A-NP series is a current sensor developed by Hangzhi that can be soldered on the PCB cir...
Hangzhi CIT High Precision Split Core current transducer
Hangzhi CIT High Precision Split Core current transducer Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd The CIT series high precision split core current transducer is developed by Hangzhi based on the ...
BMS300 Automotive Current Sensor Transducer
BMS300 Automotive Current Sensor Transducer Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd BMS300 fluxgate transducer is made of an excitation magnetic ring and a control circuit. Under no...
AIT6000-SG High-Precision Current Sensor Transducer, Accuracy 50ppm
AIT6000-SG High-Precision Current Sensor Transducer, Accuracy 50ppm Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd AIT6000-SG has a high gain and measurement accuracy in the full bandwidth range, due to the appli...
DIT300-SG high-precision digital current sensor
DIT300-SG high-precision digital current sensor Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd Hangzhi DIT300-SG is a 300 Amp High Precision Digital Current Transducer with an accuracy of 200p...