BOOSTER PUMP BRUSHLESS LEFOO
LEFOO was founded in 1995, over the past 25 years LEFOO has grown to one of theprofessional peristaltic pump manufacturersthat has 3 subsidiaries with 3 production bases, which total area is 50,000 square meters. LEFOO Group has 900 employees, includes more than 80 technical R&D and engineers teams.
Pressure Booster Pump Series
Work Flow: 2.7L~5L /min
Work Pressure: 0.5Mpa / 0.7Mpa
Noise Level: ≦42db~45db
Max Current: ≦3.2A~5.0A
REASONS TO HAVE A PUMP BOOSTER BRUSHLESS TYPE
Different from the common RO booster pump, RO pump brushless pumpapplies the neodymium permanent magnet rather than the ceramic magnet, which is 12X stronger in magnetism. The brushless pump motor does not have a carbon brush which creates a high level of noise. The RO pump brushless can offer strong pressure in the RO water system that generates 300-1000 gallons per day, while the brushless pump size is quite small and can be installed in areas with limited space.
Advantages of Pump Booster Brushless
LEFOO Group offers 300-1000 GPD brushless pumps available for big houses over 4 floors, commercial restaurants, and beverage shops (RO water can improve the tastes and flavor), RO water Shower is good for skin care.
WHAT IS REVERSE OSMOSIS?
Osmosis is a naturally occurring phenomenon that is a less concentrated solution that will have a natural tendency to migrate to a solution with a higher concentration. Whereas Osmosis occurs naturally without the energy required, reversing the process of osmosis requires applying pressure to the more saline solution. Reverse Osmosis, generally referred to as RO, is a process of purifying contaminants of molecules' size and excess minerals in water by enhancing pressure that forces the strong saline solution through a semi-permeable RO Membrane and becomes pure water. If your city water pressure is under 60 PSI. This artificial pressurization RO process requires boost pressure and is usually extra consumption in electricity. And a reverse osmosis booster pump is really necessary.
HOW DOES REVERSE OSMOSIS SYSTEM WORK?
There is a misunderstanding that the RO system consists of only one RO pump and one semi-permeable RO membrane. In this situation, but the membrane will get dirty very quickly and require frequent maintenance and cleaning, which is undoubtedly low efficiency in processing the water and also very troublesome.
The reverse Osmosis System is consists of at least 4 filters, an RO pump, RO processing water chamber, RO membrane, pipe works, pure water storage tank, and filtered reject water storage camber or expelling pipes. Reverse Osmosis leaving almost all (over 95% ) dissolved salts, and toxic heavy metal (over 98%), and bacteria and parasites(over 99%) behind in the reject stream.
Send product request
Other supplier products
 |
LEFOO FLAT FILM PRESSURE SENSOR | Diaphragm Pressure Transmitter Pressure Type: Guage/ Absolute Diffusion silicon core + 316L thin diaphragm Pressure Accuracy：0.25%FSO / 0.5% FSO... |
 |
Small Peristaltic Pump LFP301BT | Lefoo Industrial Co., Ltd. was established in 2005, with fifty thousand square meters of floor space. Since its establishment, Lefoo has been commi... |
 |
HIGH ACCURACY PRESSURE SENSOR | High Accuracy Pressure Sensor LFT2010 High precision pressure sensorapplies a silicon strain diaphragm embedded in an oil-filled steel housing and... |
 |
PRESSURE SENSOR | Pressure sensor, pressure switch, pressure transducer, pressure transmitter? When searching for the right device that monitoring your instruments, ... |
 |
DIFFERENTIAL PRESSURE PRODUCTS | LEFOO differential pressure transmitter at the pressure ranges of 0～±100Pa, 0～±1,000Pa, and 0～±10,000Pa.LCD digital display 25... |
Same products
 |
Hangzhi CAFR-A-NP Series PCB Current sensor | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | The CAFR-A-NP series is a current sensor developed by Hangzhi that can be soldered on the PCB cir... |
 |
Hangzhi CIT High Precision Split Core current transducer | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | The CIT series high precision split core current transducer is developed by Hangzhi based on the ... |
 |
BMS300 Automotive Current Sensor Transducer | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | BMS300 fluxgate transducer is made of an excitation magnetic ring and a control circuit. Under no... |
 |
AIT6000-SG High-Precision Current Sensor Transducer, Accuracy 50ppm | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | AIT6000-SG has a high gain and measurement accuracy in the full bandwidth range, due to the appli... |
 |
DIT300-SG high-precision digital current sensor | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | Hangzhi DIT300-SG is a 300 Amp High Precision Digital Current Transducer with an accuracy of 200p... |
