HG 1254
DescriptionSlip rings of HG series can be used to mount the slip ring on a bracket or used for routing space for hydraulics.Multi-contacting can ensure contacting reliable with low wear.The through hole can be from 2.0mm to 1000mm.Features◆ Suffice 360 degree unrestrained continuous rotationto transmit power or data.◆ Maintenance free◆ Operating smoothly and reliability◆ Extremely low electrical noise◆ Precious metal contact ensures long life-span◆ Convenient to assembly◆ Modularized design and also provide customized solutions.◆ Compatible with data bus protocolsTypical applications◆ Electrical test equipment◆ Exhibit / display equipment◆ Manufacturing and process control equipment◆ Laboratory equipment◆ Indexing tables,Website:, Cable reels◆ Camera system◆ Robotics, rotary sensors, urgent illumination◆ Aviation, military, marine and medical equipment equipmentOptions◆ Operation speed, current &voltage◆ Housing color◆ Flange mounting◆ Position of wire outlet◆ Connector◆ Wire length◆ No. of circuits◆ Protection level (dust and water)◆ Housing material◆ Signal,power and data transmitted or◆ Inner diameter combination transmittedElectrical Parameters No. of circuits 1-24 rings Rated Voltage 380VAC/240VDC Rated Current 5A/ring Dielectric Strength 500VAC@60Hz,60s between each circuit Insulation Resistance 1000MΩ/500VDC Electrical Noise ＜0.01Ω Lead length Standard 300mm Lead Size AWG22 silver plated Teflon® ULMachinery Technology ParameterOperating Speed 0-800rpm Working Temperature -40℃ - +80℃ Working Humidity 75%RH or higher Contact Material Precious Metal Bearing Steel ball bearings Structure Material Engineering Plastic or Metal Torque 0.1N/m for 6 rings, 0.03N/m increased for every 6 rings added. IP Rating IP54 or higher Operational life ≥ 50,000,000 cycles (Depends upon working temperature, rotating speed,
environment and continuous working time.)Outline dimesion unitInstallation Guide1.Position the slip ring in the desired location and tighten four screws to shaft.2.Route the wiring and make the necessary connections,fasten the anti-rotation tab.Attentions1.Slip ring can not support the weight of equipment which connects with it, roating equipment should be fastenedso that its weight will not fall on the rotor.2.Slip ring should be used in dry,low dust environment.If used outdoor,shield is necessary.3.The surface of lead wire should avoid being damaged while equiment rotating,all lead wire can not bearweight while you put the lead wire in order.4.No damaging the surface of lead wire while barking its end.
Other supplier products
|
|
Gyro Series |
Please provide us below information, we will provide thetransmission solution according to your demands:◆ No. of Circuit(Power & Signal)◆ Signal de... |
|
|
HM022 |
DescriptionSlip rings of the HM series are specially fit for small or miniature rotating system of transmitting low controlling signal. Applies nob... |
|
|
Electrical And Pneumatic Hydraulics Hybrid Series |
We strive to meet the needs of our customers. If an assembly from our standard line does not fit your requirements,Website:, our R&D team will work... |
|
|
HG 90190 |
DescriptionSlip rings of HG series can be used to mount the slip ring on a bracket or used for routing space for hydraulics.Multi-contacting can en... |
|
|
HM025 |
DescriptionSlip rings of the HM series are specially fit for small or miniature rotating system of transmitting low controlling signal. Applies nob... |
All supplier products
Same products
