Vulcanized Fiber Rod
The vulcanized fiber rod is made of paper core. The paper core shaft is treated with zinc chloride to reach the specified wall thickness. They are then cleaned, dried, rolled, ground and ground to obtain the desired inside and outside diameters. The density of vulcanized fiber tube is about 1.40 g/cm3. It has good physical and mechanical properties, dielectric strength, ARC RESISTANCE AND ARC extinguishing performance. Due to its excellent processability, the vulcanized fiber tube can be polished, rolled, coiled, tapped, rotated and rotated. The main applications that are easy to manufacture into a variety of products are fuse boxes, high-voltage fuses, bushings, lightning rods, bushings, insulators and bushings. Colour: Grey, black, red and white, standard length 30"42"and 48". Tube sizes range from 3 to 100 mm.
Other supplier products
|
|
Fiberglass Rod |
Fiberglass rods are made from fiberglass epoxy, which are then pulled and pulled. And complete the design, calcination and curing. It is used in th... |
|
|
Composite Arrester |
1. Impact Resistance, no collision damage during transportation, flexible installation, suitable for switchgear. 2. Special structure, integral com... |
|
|
Fuse tubes/arc-extinguishing fuse tubes/vulcanized fiber fuse tubes/fuse tubes for high-voltage fuses |
This product has good electrical insulation, ARC resistance, and arc extinction. There are three types of this product: 1. This product is all stee... |
|
|
Drop fuse |
1. LOW MINIMUM BREAKING CURRENT, low power loss, low arc voltage. 2. High breaking capacity and effective short-circuit expected current limit. 3. ... |
|
|
Fuse wire |
Fuse elements are made of precisely tested materials, high purity silver or silver-copper or nickel-chromium EUTECTIC, depending on the current rat... |
All supplier products
Same products