supply hf rfid module,IIC/UART,4 wires antenna
JMY501 series are RFID reader/writer module with UART and IIC serial ports. JMY501 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability. Qualifications:
• PCD: NXP RC500, RC531, RC632, RC400; FM1722
• Working frequency: 13.56MHz
• RF standard: ISO14443A, ISO14443B, ISO15693
• Operating distance: 100mm(depending on card and antenna design)
• Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
• Auto detecting card: Supported, default OFF
• EEPROM: 512Bytes
• Interface: IIC & UART (selected by SPS pin, recommend to use IIC)
• Communication rate: IIC--400Kbps, UART--19200bps/115200bps
• Max.command length: 511 Bytes
• Interface level: 3.3V (TTL level; 5V tolerance)
• Power supply: DC5V
• Power consumption: 70mA
• Dimension: 42mm×21mm×8mm
• Package: DIP32
• Weight: about 15g
• Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
• Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
• ISP: Supported
• RoHS: Compliant
Antenna connects to the module by 4 wires.
TX500, size: 70mm*70mm, 90mm reading range
TX501, size: 50mm*50mm, 70mm reading range
TX502, size: 30mm*30mm, 60mm reading range
Any requirements is available.
Other supplier products
|
|
sell 13.56MHZ rfid reader,Ethernet RJ45,reading ICODE1&2 |
MR730 series contactless smart reader is the Ethernet interface desktop reader based on NXP PCD or compatible PCD. It doesn't have display. The re... |
|
|
sell hf rfid reader,USB or RS232C |
MR701 series, based on NXP PCD or compatible PCD, is popular and high performance desktop reader. The reader supports series IC cards according t... |
|
|
sell 13.56MHZ rfid module,RS232C,50ohm antenna,SAM slot |
JMY612 series are RFID reader/writer module with RS232C serial ports. JMY612 has various functions and supports multi ISO/IEC standard of contactl... |
|
|
sell 13.56MHZ/125KHz access reader,wiegand/RS485,multi shell |
JMY350 series are the popular type access card reader. The way of installation is 86 electrician-boxes. The interface is RS485 & Wiegand. There ar... |
|
|
Sell 13.56MHz HF RFID mini reader/writer module JMY505 with IIC&UART interface |
JMY505 series are RFID reader/writer module with UART and IIC serial ports. JMY505 has various functions and supports multi ISO/IEC standard of con... |
All supplier products
Same products
