Francis turbine
Francis turbine
Francis turbines are built in a compact structure, with high efficiency, and can be applied to a wide range of water heads. This feature makes the Francis turbine type a widely used one around the world. The key Francis turbine components includes Runner, Distributor, Main shaft, Main shaft seal, Turbine guide bearing, Governor, among other.
Shenyang Getai Hydropower Equipment Co.,Ltd is located in Shenyang City, the old Northeastern industrial base of China. GETAI is a high technology enterprise established in 1992, aiming to supply integral solution for new and old hydropower plants. Its main products include , Francis turbine, Kaplan turbine and relevant accessories.main products: , ,Pelton Turbine Formula,, , Francis Turbine Generator, , welcome to our factory!
Application Scope:
|
Application: |
Francis Water Turbine Generator Unit |
|
Water head: |
20 ~ 700m |
|
Output: |
|
|
Frequency: |
50/60HZ |
|
Runner diameter |
|
|
Life Span |
30-50 years |
Getai Hydropower is a China supplier of Francis Turbine, Francis Turbine Generator, Francis Turbine Parts, Francis Runner, Construction And Working Of Francis Turbine. We have a complete quality management system. Choose us, you can be get most careful and thoughtful service!
Pelton Turbine Design, Francis Turbine Design, Kaplan Turbine Designcompany China.
Product Introduction
Chemical CompositionforASTM A473S41500andASTM A743CA6NM（%）
|
Material No. |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
|
ASTM A473S41500 |
≤0.05 |
≤0.60 |
≤0.030 |
≤0.030 |
||||
|
ASTM A743 CA6NM |
≤0.06 |
≤0.040 |
≤0.030 |
More information please view here.
Mechanical PropertyforASTM A473S41500andASTM A743CA6NM
|
Material No. |
σ0.2(Mpa) |
σb(Mpa) |
δ5(%) |
ψ(%) |
Akv(J/cm2) |
HB |
|
ASTM A473 S41500 |
≥620 |
≥795 |
≥15 |
≥45 |
≥50 |
≤295 |
|
ASTM A743 CA6NM |
≥550 |
≥755 |
≥15 |
≥35 |
≥50 |
≤285 |
Pelton Turbine Rehabilitation, Kaplan Turbine Rehabilitation, Francis Turbine RehabilitationChina.
Send product request
Other supplier products
 |
Double-structure Francis Turbine Runner for Project in Papua New Guinea | On January 15, 2020, Project Owner Mr. Francis and Project Supervisor Mr. Bjarne Borrsen, visited Shenyang Getai Hydropower Equipment Co., Ltd. for... |
 |
Forged Entire CNC Machined Pelton Runner | Forged Entire CNC Machined Pelton Runner Forging could considerably improve metal's organizational structure and mechanical property. Forging of... |
 |
CNC & Forged Pelton Runner, Pelton Turbine Forging, Pelton Turbine Generator China & Supplier | Forged Entire CNC Machined Pelton Runner CNC & Forged Pelton Runner, Pelton Turbine Forging, Pelton Turbine Generator China & Supplier Fo... |
 |
Pelton Turbine Generator | Pelton Turbine Generator Pelton turbine is suitable for medium and high water head power plants. The key components are: Pelton runner, main shaft... |
 |
Pelton Turbine Generator | Pelton Turbine Generator Pelton turbine is suitable for medium and high water head power plants. The key components are: Pelton runner, main shaft... |
