Batch-type Furnace

Usage:Batch-type furnace is often used for heat treatment, it can be Normalizing, tempering, quenching and Hardening.Parameter:Range temperature : 950°C~1300°CTemperature Uniformity : < 5℃<4.5℃ in the effective heating hot zone.Max uniform heating rate: 10℃/min from 500 to 1000℃Heating Element:Heating elements shall be made of Ni-Cr resistance wire or equivalent(Preferable Kanthal A-L embedded heating elements) and shall be suitably arranged（Circular/Rectangular fashion all around the hot zone）to achieve a temperature uniformity of ±5℃ in the effective hot zone. The elements will be easily removable for servicing and maintenance.Heat insulation: The heater shall be insulated with radiation shield made out of concentric metal shields(stainless steel etc).Heat insulation shall be securely fixed with the help of high alumina hardware. There are multi layer of radical, front, and rear shields provided to minimize the heat loss. The skin temperature of the furnace shall not exceed 30-40℃Power: 3phase, 380V, 50Hz. Controls and Instrumentation:Digital Temperature Programmable Controller: Microprocessor based digital PID temperature controller of latest model with which work in conjunction with K-type thermocouple should be provided for measurement and control of the temperature in the furnace.Over Temperature Controller: Over Temperature Controller could be provided to safe guard the furnace from over shoof of temperature from the set temperature.PLC: PLC could be provided for aver all control of all furnace components, interlocking of all process parameters and temperature cycle.Manual Mode of Operation: A manual mode of operation that bypasses microprocessor control and cnabic total manual mode could be provided.Temperature measurement and control: Two additional thermocouple of K-type can be provided in the hot zone to monitor temperature measurements and control.Huachang Metallurgical, one of the professional manufacturers, now brings you high quality and high precision batch-type furnace from its professional factory. We are also a successful and experienced supplier and exporter of batch-type furnace. We have qualified and experienced staff as well as advanced equipment, you can rest assured to get products with us.

Other supplier products

	Charging Basket	Usage:Charging basket is used for material charging. There are 4-5 charging baskets for prepare in the process of smelting. Strengths of HC chargin...
	Furnace Transformer	Describe:Furnace transformer is a special transformer for smelting, which is made with higher standard on process. We can supply the high-quality t...
	Electrode Holder	DescriptionElectrode Holder is a special device for holding electrode. it should got the reasonableness of structure for water cooling in the condi...
	Water-cooled Cable	DescriptionWater cooled cable is a hollow water, special cable for high current heating equipment, usually by electrode (cable head), a conducting ...
	Ladle Furnace	Usage:Ladle refining furnace belongs to the secondary refining equipment, which typically to be used follows the primary melting furnace. Its main ...

All supplier products

Same products

	insulation material and transformer parts	Seller: Longsper insulation technology(TIANJIN)CO.,LTD	transformer press paperboard diamond dotted paper crepe paper DMD Chinese Nomex Paper
	S type alloy steel load cell TSC 50kg for force measuring systems loadcell tester	Seller: Yixing City Sanwei Electric Manufacturing Co., Ltd.	lS type load cell , tension and compression lGood output symmetry , compact structure , simple ...
	Round Rubber Washer	Seller: Ex-proof Cable Gland, EX Cable Glands, Explosion Proof Products, OEM Cable Gland Supplier & Manufacturer China	O-ring We are Sealing washer supplier For use on cable gland entry threads,which is waterproof an...
	Mo Alloy Powder	Seller: Shanghai Laiwu Powder Material Co.,Ltd.	Mo Alloy Powder,Pre Alloyed Powder
	Ni-Mo Alloy Powder	Seller: Shanghai Laiwu Powder Material Co.,Ltd.	Ni-Mo Alloy Powder,Website: Alloyed Powder