RD Sampler
RD sampler
It is a full bore sampler which is used in cased hole and is operated by annulus pressure. It is mainly used in the full bore formation testing job to get the formation fluid sample under downhole pressure state. The entire test tube string is kept full bore status before and after sampling and does not affect the conduct of subsequent operations.
Technical Parameters
Specifications/"
3-7/8"
5"
OD (mm)
99
127.5
Drift OD (mm)
45
57
Total length (mm)
3055
2198
Working pressure (Mpa)
70
70
Working temperature (°C)
-29~+177
-29~+177
Resistance to Tension (KN)
1500
2766
Internal Pressure Strength (Mpa)
130
95
Outer Pressure Resistance (Mpa)
94
86
Torque Strength (KN.m)
19.5
56
Binding Screw Thread
2-7/8" CAS & 2-7/8" EU
3-7/8"CAS & 3-1/2" IF
Other supplier products
|
|
RD Safety Circulating Valve |
RD Safety Circulating Valve
RD safety Circulating Valve is mainly used to seal oil-gas layer when the formation test ends and carry on c... |
|
|
RTTS Circulating Valve |
RTTS Circulating Valve
RTTS Circulating valve is a locked-open/locked-closed valve that serves for opening and closing holes. The valve c... |
|
|
Round Mandrel Slip Joint |
Round Mandrel Slip Joint
Round Mandrel Slip Joint is mainly used in FUL-FLO formation test, hook wall test, fracturing, acidizing operat... |
|
|
Sucker Rod, Polished rod, Sucker Rod Guide, Pumping Unit |
Description:The sucker rod, an essential part in the rod production system, is used to connect the pumping unit on the ground and the oil well pump... |
|
|
RD Sampler |
RD sampler
It is a full bore sampler which is used in cased hole and is operated by annulus pressure. It is mainly used in the full bore... |
All supplier products
Same products
