12VDC 25Amp 18 Channel Battery Backup CCTV Power Supply (12VDC25A18P/B)
12VDC 25Amp 18 Channel Battery Backup CCTV Power Supply (12VDC25A18P/B)Descrition:12VDC25A18P/B: 12VDC 25Amp 18 Channel Battery Back-up CCTV Power SupplyThe CCTV power supply is primarily designed for WUF-GV,Website:, PTZ and camera of CCTV system. It’s also used for access, building/house control, intrude alarm and other light-current. It is for desktop or wall-mounted installation.Features:1. Soft starting current, effectively reduce the impact of AC input, independent short-circuit protection and surge protection, resume automatically after clearing of fault, EMI filter, minimum ripple, 100% load test, quality guarantee, high efficiency, low T-rise, continuous duty2. Input with a switch, LED indicators lighten when the power supply operates normally, and each output contains independent PTC, LED indicator, which is not interfere with each other3. 12 Volt DC 25Amp switch mode power supply 4. 18 individually PTC auto-reset fuses protected outputs with LED5. Backup battery: 12V 7AH6. Charging Current: 350mA7. Switch mode power supply (regulated voltage)8. Integral surge protection9. Individual LED power indication10. Individual PTC reset-able fuses 11. Internal On/off safety power switch with LED indicator12. Beige metal housingTechnical specifications:12VDC 25Amp 18 Channel Battery Backup CCTV Power Supply (12VDC25A18P/B)Power300WMetal Case Dimension37.7×33.2×8.2cmNet Weight4.26kgsInputInput Voltage110/220VACInput Voltage Frequency50Hz-60HzOutputOutput Voltage12VDC±5%Output Current25A,18 channels for 18 sets loadOutput Ripple Noise(Vp-p)80mVp-p@25℃/Rated input voltage & Rated output loadReply Time of Starting up≤3S Input 100Vac, Rated output loadFuseType /RatingPTC 1.85A/60VProtectionOver voltage protectionWhen over voltage occurs, it will be switch to self-protection status to protect the load.Over current protectionWhen over current occurs, the corresponding channel output will automatically switch to self-protection status, and the other channels output work normally, when clearing of fault, then switch back to normal.Short-circuit ProtectionWhen short-circuit occurs, the individual PTC fuse will break the circuit. When the fault is cleared, it will switch back to normal automatically.ChargeThe power supply will automatically switch to storage battery if there is outage.CircumstancesWorking Temperature0℃-+50℃Storage Temperature-20℃-+80℃RH20%-90%Heat ReleaseNatural heat dissipationConnectionInputThree-pin socketOutput18 channels outputDielectric StrengthInput to output1500Vac/60S leakage current≤1.5mAInput to FG1500Vac/60S leakage current≤2.0mAFG to output500Vac/60S leakage current≤1.5mAInsulating strengthInput to output≥20MΩ/500VDC@25℃Leakage Current≤0.09mA @DC8V/25A/25℃
Other supplier products
|
|
4.3 Inch TFT-LCD TVI CCTV Camera Tester (CT600TVI) |
4.3 Inch TFT-LCD TVI CCTV Camera Tester (CT600TVI),TVI CCTV Tester |
|
|
32CH Passive CCTV UTP Video Balun With RJ45 , Terminal Block (VB232S) |
32CH Passive CCTV UTP Video Balun with RJ45 ,Website:, Terminal Block (VB232S)Description:The 32CH Passive CCTV UTP Video Balun VB232 is to convert... |
|
|
HD-CVI/TVI/AHD CCTV UTP Passive Power & Video Balun (PV22H) |
HD-CVI/TVI/AHD CCTV UTP Passive Power & Video Balun (PV22H), HD Video Balun |
|
|
12VDC 2A IEC60950 Plug-in CCTV Power Supply With South African Plug (S1220Z) |
12VDC 2A IEC60950 Plug-in CCTV Power Supply With South African Plug (S1220Z), CCTV Power Adapter |
|
|
8FE POE + 3 Gigabit Uplink Network POE Switch (POE0830B-2) |
8FE POE + 3 Gigabit Uplink Network POE Switch (POE0830B-2) POE0830B-2 is applied to POE IPC camera,Website:, POE WIFI AP, and POE IPPHONE, and easy... |
All supplier products
Same products
