1ch Passive UTP Video Balun With Transient Protection(VB202P)
1ch Passive UTP Video Balun with Transient Protection(VB202P)Description:The Passive UTP Video Balun VB202P is a passive transmission device that transmits video signal over unshielded twisted pair wires,Website:, point-to-point, for distances up to 1000 feet (330 m). It uses Category 5 UTP. It’s easy to install and cost effective, and does not require power.The extremely compact size allows the balun VB202P to fit anywhere that a BNC can fit. It is ideal for mounting directly on virtually all high-density DVRs without any additional cabling. Its crosstalk and noise immunity ensure quality video signals.Features:1. Full-motion CCTV video at distances up to 330m When used with any passive transceiver2. Up to 1500m with any active UTP video receiver3. Outstanding interference rejection, transient protection4. High quality image5. It can work as video transmitter or video receiver6. Compact size and easy installation7. With Pigtail BNC connectorTechnical specifications:1ch Passive UTP Video Balun with Transient Protection(VB202P)Video FormatNTSC, PAL, and SECAM Frequency ResponseDC to 8MHzAttenuation0.5dB typCMRR60 dB ImpedanceCoax, Male BNC75 ohms Terminal Block100 ohmsWorking environmentWorking Temperature-10℃ to +50℃ Storage Temperature-30℃ to +70℃Humidity 0 to 95%Wire TypeUTP5UTP ConnectionScrews terminal BlockPowerNo power requiredCaseABS PlasticDimension31mm*15mm*16mm with 14cm BNC connectorWeight 44g/pair
Other supplier products
|
|
HD-CVI/TVI/AHD Video Ground Loop Isolator For Coaxial Cable (GB100HD) |
HD-CVI/TVI/AHD Video Ground Loop Isolator For Coaxial Cable (GB100HD),Video Ground Loop Isolator |
|
|
CCTV BNC Male Solderless Connector With Boot (CT5027) |
BNC Male Solderless Connector with Boot / CCTV Connector / BNC Connector CT5027CCTV BNC Male Solderless Connector with Boot (CT5027)Description:CCT... |
|
|
3.5'' CCTV Cameras IP, CVI, TVI, AHD, Analogue Tester (CT2800HDA) |
7" Universal Touch Screen All In One Camera Tester (IPCT8600HDA),CCTV Tester |
|
|
8FE POE + 1SC CCTV Network POE Switch (POE0801SCB) |
8FE POE + 1SC CCTV Network POE Switch (POE0801SCB) POE0801SCB is applied to POE IPC camera,Website:, POE WIFI AP, and POE IPPHONE, and easy for net... |
|
|
4.0" CCTV HD Combine Ip Camera Tester (IPCT4610) |
4.0" CCTV HD combine Ip Camera Tester (IPCT4610) Description:The IPC tester supports traditional analog SD video system,Website: HDsystem.1.Analog ... |
All supplier products
Same products
