12VDC 10Amp 9 Ch CCTV Power Supply With Lock On Door (12VDC10A9PL)
12VDC 10Amp 9 Channel CCTV Power Supply with Lock on Door 12VDC10A9PL
Descrition:12VDC10A9PL: 12VDC 10Amp CCTV Power Supply Box for 9 Cameras with Lock on Door
The CCTV power supply is primarily designed for WUF-GV, PTZ and camera of CCTV system. It’s also used for access, building/house control, intrude alarm and other light-current. It is for desktop or wall-mounted installation.
Features:1. Power up to 9 CCTV CCTV surveillance cameras2. 12 Volts DC3. 10 Amp total output4. Max output current up to 1.6 Amp/Channel5. 9 individually PTC auto-reset fuses protected outputs6. Lock on Door7. Switch mode power supply (regulated voltage)8. Integral surge protection9. Individual LED power indication10. Individual PTC reset-able fuses 11. Internal On/off safety power switch with LED indicator12. Beige metal housing
Technical specifications:
Model
12VDC10A9P
Power
120W
Metal Case Dimension
24.5×20.8×8.7cm
Net Weight
2kgs
Input
Input Voltage
110/220VAC
Input Voltage Frequency
50Hz-60Hz
Average Input Current
100Vac≤1.6A
Efficiency
≥80%
Output
Output Voltage
12VDC±5%
Output Current
10A, 9 channels for 9 sets load
Output Ripple Noise(Vp-p)
110mVp-p@25℃/
Rated input voltage & Rated output load
Reply Time of Starting up
≤3S Input 100Vac, Rated output load
Fuse
Type /Rating
PTC 1.6A/60V
Protection
Over Voltage Protection
When over voltage occurs, it will switch to self-protection status to protect the load.
Over Current Protection
When over current occurs, the corresponding channel output will automatically switch to self-protection status, and the other channels output will work normally. When the fault is cleared, it will switch back to normal.
Short-circuit Protection
When short-circuit occurs, the individual PTC fuse will break the circuit. When the fault is cleared, it will switch back to normal automatically.
Circumstances
Working Temperature
0℃-+50℃
Storage Temperature
-20℃-+80℃
RH
20%-90%
Heat Release
Natural heat dissipation
Connection
Input
Three-pin socket
Output
9 channels output
Dielectric Strength
Input to output
1500Vac/60S leakage current≤1.5mA
Input to FG
1500Vac/60S leakage current≤2.0mA
FG to output
500Vac/60S leakage current≤1.5mA
Insulating strength
Input to output
≥20MΩ/500VDC@25℃
Leakage Current
≤0.02mA @AC110V(220V)/25℃
RG
≤0.012Ω@DC8V/25A/25℃
Competitive Advantages:1. This is one of the best 12VDC CCTV power supply boxes on the market for security cameras.2. We replace the cheap "glass fuse" with "PTC" Reset Fuses which will Auto Reset after you fix the short. You don't have to run around town try to find the replacement fuses. All you have to do is to fix the shorts.3. The red light shorts indicator helps you to know which camera is not working.4. Dependable and long lasting5. Warranty: 2 years
Other supplier products
|
|
96W 24VDC 4A CE(LVD & EMC) & IEC60950 CCTV Power Supply (S2440D) |
96W 24VDC 4A CE(LVD & EMC) & IEC60950 Desktop Type CCTV Power Supply S2440D Descrition:The CCTV power supply is primarily designed for WUF-GV,Websi... |
|
|
3.5'' CCTV Cameras IP, CVI, TVI, AHD, Analogue Tester (CT2800HDA) |
7" Universal Touch Screen All In One Camera Tester (IPCT8600HDA),CCTV Tester |
|
|
12VDC 5A CCTV Switching Power Supply (12VDC5A) |
12VDC 5A CCTV Switching Power Supply , AC / DC Switch Mode Power Supply With Matel CaseQuick Detail:Switch mode power supplyCCTV Power Supply12V DC... |
|
|
7" Universal CCTV IP Camera Tester With Video Display (IPCT8600) |
7" Universal Touch Screen IP Cam Test Monitor ,Website:, CCTV Test Monitor with Video Display for IP Camera7" Universal CCTV IP Camera Tester with ... |
|
|
Crimp On Male CCTV BNC Connector For Coaxial Cable (CT5045) |
Crimp On Male CCTV BNC Connector For Coaxial Cable (CT5045), BNC Male Crimp Connector |
All supplier products
Same products
