Full Lug Dual Plate Check Valve
Dual Plate Check ValveHuachao Dual Plate Wafer Check Valve has One Piece cast heavy stronger Body configuration provides reduced weight and size compare to a swing check valve or lift check valve. This results in saving Initial cost, space and pipe support element installation. The Dual Plate, Wafer Check Valve employs two-spring-loaded plates hinged on a central hinge pin. When the flow decreases, the plates close by the action of torsion spring before flow reversal takes place. All features put together make the Dual Plate Check Valve as the most efficient & versatile design. It is also referred to as SILENT CHECK VALVE It is much easier to install between standard gaskets and line flanges, and therefore is more cost effective to install and to maintain. Its design complies with API 594 and API 6D, testing to API 598.» Sizes Ranges from 2" through 60".»Material:stainless steel ,carbon steel» Pressure Ratings from Class 150 to Class 2500, PN16 to PN420» Design & Manufactured to API 6D, API 594, ASME B16.34 or Equivalent» P.T Ratings to ASME B16.34» Face to Face Dimensions to ASME B16.10 » Flanged Ends to ASME B16.5» Butt-weld Ends to ASME B16.25» Valves Marking to MSS SP-25» Inspect & Tested to API 598» Structured in One Piece Union Body » Ends Connections in Flanged R.F or RTJ, Wafer, Fully Lugged and GroovedHot tags: Dual Plate Check Valve, China manufacturer, factory, mill, supplier, cheapFull Lug Dual Plate Check ValveFeatures:Light Weight, Versatile Design, and 80 to 90% lighter then conventional full body check valve. Reduces pipe supports, simplifies piping, easier, less costly installation. Spring Loaded double door design has low cracking pressure. Disc open 80% to ensure positive closing Materials and trims available for all services within temperature range. Rubber To Metal or Metal To Metal Seat available Neoprene, Buna-N, EPDM, Viton Silicon etc.
Other supplier products
|
Cast Steel Globe Valve |
Cast Globe ValveHuachao Cast Globe Valves are designed and manufactured according to standards BS 1873, ASME B16.34 or DIN3202 and special customer... |
|
Full Lug Dual Plate Check Valve |
Dual Plate Check ValveHuachao Dual Plate Wafer Check Valve has One Piece cast heavy stronger Body configuration provides reduced weight and size co... |
|
Forged Steel Gate Valve |
Forged Gate ValveHuachao Forged Gate Valve are designed and manufactured strictly to international standards API 602, ASME B16.34 or PIN 3202, feat... |
|
Piston Lift Wafer Check Valve |
Single Disc Check ValveFeatures These Single Disc Check Valves are best used at down stream of pump. Used in Heating Installation, Steam Condensat... |
|
Forged Stainless Steel Check Valve |
Forged Check ValveHuachao Forged Check Valve conform to API 602, ASME B16.34, tested according to API 598 and marked as per MSS SP-25.Construction ... |
All supplier products
Same products