Facet coalescer filter cartridges with good quality
INTRODUCTION:
Facet CAA Series 5 coalescer cartridges offer the finest performance available. This standard line of high flow coalescer cartridges removes ultra-fine solids and enhances separation of water from jet fuel.
The Facet coalescer separator housings equipped with CAA Series 5 coalescer and companion separator cartridges have been tested and fully qualified to meet the performance requirements to EI 1581, Fifth Edition, Category C (Category C replaces the previous class A, B, and C of API 1581 3rdEdition.)
Built for balanced fluid flow-thru and structural strength, each CAA Series 5 coalescer cartridge is a single-piece construction of various combined media, precisely arranged in many layers and pleats, wrapped around a coated, perforated metal center tube—all encased in an outer sock material. All are 6” OD (152 mm) by 31∕2" ID (89 mm) and available in standard interchangeable nominal lengths from 111∕4" (290 mm) to 571∕4" (1450 mm).
The CAA Series 5 coalescer cartridges are available in two cartridge mounting styles: self-centering rod
mount and screw base. The rod mount style has treated metal end caps, while the screw base ends are injection molded, glass-filled nylon. This screw base material offers superior strength and ease of maintenance—uniform threads, no shrinkage, no galling and no gasket to recover.
A permanently affixed Buna-N gasket seals against the V-type knife edge mounting adaptor to provide a positive seal. It will not separate from the cartridge during installation or change out.
STANDARD DESIGN FEATURES:
• Tested and qualified to the Fifth Edition of EI 1581, Category C
• Multi-layered media for increased solids holding capacity
• Ultra-fine solids removal
• Maximum water coalescence
• Balanced cartridge flow characteristics
• Recommended maximum operating temperature: 240°F (115oC)
• Withstands in excess of 75 psi differential pressure
• pH range from 5 to 9
• Screw base or open-end configuration
MATERIALS:
• All metal components are treated against corrosion
• Screw base ends are injection molded, glass-filled nylon with locked-in gaskets
• Buna-N gaskets—other materials are available on request
If you need, please feel free to contact:Miss. Livia
E-mail: />Whatsapp / / />Tel: 86 , Xinxiang Lifeierte Filter Corp., LTD
Web in English: / Web in Thai: th.le-filter.com
Add: No. 9 Hongli Road, Muye District, Xinxiang City, Henan Province, China.
Send product request
Other supplier products
 |
Cartridge type industrial dust collector | Features: 1, high dust removal efficiency. Can filter fine dust, general filter cartridge filter accuracy of 5 ~ 7 microns, filtration efficiency ... |
 |
Environmental Friendly High Temperature Resistance Pulse Type Dust Collector | Introduction: Long bag off-line pulse dust remover is mainly composed of upper tank, middle tank, ash hopper, air inlet flow pipe, bracket, filter... |
 |
Waste plastic/tires recycling pyrolysis oil plant | Working principle:First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor wil... |
 |
LEFILTER cartridge dust collector with independent electrical box | Features: 1, high dust removal efficiency. Can filter fine dust, general filter cartridge filter accuracy of 5 ~ 7 microns, filtration efficiency ... |
 |
cyclone dust collector for paper making industry | Introduction:The CLP-B type cyclone dust collector can be used either alone or in combination with multiple cylinders. It is connected by a common ... |
Same products
 |
6 Axis MIG Welding Robot For Carbon Steel | Seller: Beijing Kaberry International Trade Co.,Ltd | 6 axis MIG welding robot for carbon steelThis model has high quality and good price. We focus on ... |
 |
1800 Mm Arm Length Mig Welding Robot | Seller: Beijing Kaberry International Trade Co.,Ltd | 1800mm arm length MIG welding robot We supply 1800mm arm length MIG welding robot. The robot is o... |
 |
1650 Mm Arm Length Mig Welding Robot | Seller: Beijing Kaberry International Trade Co.,Ltd | 1650mm arm length MIG welding robotWe supply 1650mm arm length MIG welding robot. This model is t... |
 |
1440 Mm Arm Length Mig Welding Robot | Seller: Beijing Kaberry International Trade Co.,Ltd | 1440mm arm length MIG welding robot This model is our popular model. it is widely used in China. ... |
 |
6 Axis MIG Welding Robot For Stainless Steel | Seller: Beijing Kaberry International Trade Co.,Ltd | 6 axis MIG welding robot for stainless steel We produce welding robot from 2015,Website:, now we ... |
