Casing Centralizer
Casing CentralizerCasing Centralizer is an important device which is used to keep the casing at the center of the hole in the aim of improving the cementing efficiency. The purpose of a Casing Centralizer is to facilitate running casing to the desired depth and assist in centering the casing in the well bore.Feature: simple structure, easy to use, long service period. Type: Single Bow-Spring Centralizer, Double Bow-Spring Centralizer, Spring Centralizer, Hinged Non Weld Bow Spring, Hinged Weld Bow Spring, Slip on Welded Bow Spring, Drill Pipe Centralizer, Spiral Cast Al/Zn Centralizer, Straight Cast Al/Zn Centralizer, Slip on Cast Steel Centralizer, Spiral Cast Al/Zn Centralizer C/W Integral Stop, Rigid Centralizer, Roller Rigid Centralizer, etc.Technical Parameter of Casing Spring CentralizerSpecificationNo.s of SpringOD (mm)ID (mm)Height (mm)4 1/2" x 6"4160116450/5754 1/2" x 6 1/4"4167116450/5754 1/2" x 7 7/8"4210116450/5754 1/2" x 8 1/2"4230116450/5755" x 6"4160128450/5405" x 6 3/4"4180128450/5755" x 7 7/8"4210128450/5755 1/2" x 7 7/8"5210140450/5755 1/2" x 8 1/2"5216/245140450/5755 1/2" x 8 3/4"5222/250140450/5755 1/2" x 9 7/8"5251/264140450/5755 1/2" x 9 1/2"5242/264140450/5757" x 8 1/2"6216/230179450/5757" x 8 3/4"6222/233179450/5757" x 9 1/2"6242/264179450/5757" x 9 7/8"6251/264179550/6509 5/8" x 12 1/4"8346245550/6509 5/8" x 13 3/8"8346/352245550/6509 5/8" x 12 13/16"8378245550/65010 3/4" x 15 1/2"9405275550/65010 3/4" x 14 3/4"9374275550/65013 3/8" x 17 1/2"10440/466342550/65013 5/8" x 17 1/2"11440/466342550/65020 x 26"/610/650Technical Parameter of Rigid CentralizerSpecificationOD (mm)ID (mm)OAL (mm)4 1/2″×6″145116.52005″×6″1451292005 1/2″×8 1/2″/3006 5/8″×8 1/2″/3007″×8 1/2″/3007″×9 1/2″/3007″×9 5/8″/3009 5/8″×12 1/4″ 3/4″×11 3/4″ 3/8″×17 1/2″If you have any further requirements, please feel free to contact us
Other supplier products
|
|
Air Chamber Assy |
Air Chamber AssyAir Chamber is the main component of discharging end of slurry pump, which has types of KB-45 and KB-75. Air Chamber is a combinati... |
|
|
Float Valve Sub |
Float Valve SubFloat Valve Sub is usually connected on the top of the bit to control down hole liquid. While stopping pump and connecting with sing... |
|
|
Type DDZ Elevator |
Type DDZ ElevatorDDZ series elevators are center latch elevator with 18 degree taper shoulder ,applied in handling the drilling pipe and drilling t... |
|
|
Section Mill |
Section MillSection mills are primarily used to mill sections in the casing for: Sidetracking, gravel packing, and/or perforation zones. GAOTON sec... |
|
|
Gate Valve |
API 6A Expanding Gate ValveThe Body And Flanges Are Integral (Non-Welding). Shot Blasting For Every Parts Of Valve. Phosphating To Improve Corrosio... |
All supplier products
Same products
