.

24KV SF6 Gas Load Break Switch

Application of 24KV SF6 Gas Load Breaker Switch

The SF6 LBS 24kv 630Agas-insulated switch is a three-phase interoperable switching device designed for use in distribution system cabling and overhead power line segment applications.

The 24KV pole mounted disconnect switchcan be operated manually in the field or remotely from the control center.

Technical Parameters of 24KV SF6 Gas Load Breaker Switch

Products Type

FWX-24

Basic Ratings

Maximum System Voltage

24kV

Rated Continuous Current

630A

Rated Frequency

50/60Hz

Short Time Withstand Current

16kA/1sec

Making and Breaking Capacity

Mainly Active Load Current

630A

Number of Load-break Operations

400times

Short-circuit Making Current (peak)

40kA

Number of Making Operations

5 times

Cable Charging Current

25A

Line Charging Current

Closed Loop Circuit Current

630A

Transformer Magnetizing Current

22A

Power Frequency Withstand Current Test

Wet Condition-10sec Ph- Ph-Eth, Across Interrupters

50kV

DryCondition-1min,Ph- Ph, Phase to Earth

64kV

Dry Condition - 1 min Across Interrupter

79kV

Impulse Withstand Current Test( 1.2 x 50 µs )

Phase to Phase, Phase to Earth

125kV

Across Interrupter

145kV

Other Ratings & Specifications

Internal Arc Test

20kA / 0.1 sec

Arc Extinction Medium

SF6 Gas

Insulation Medium

SF6 Gas

Creepage Distance (Porcelain)

700mm

Creepage Distance (Silicon)

1200mm

Dry arcing distance

IP Level

65

Operation Performance

Closing/Opening Time

1sec

Mechanical Operations (Guaranteed)

10000times

Operating Temperature (*Manual Type)

-25~+70℃

Gas Pressure

Nominal Pressure (MPa, at 20°C)

Bursting Pressure (MPa)

  1. ~0.6

Minimum Gas Pressure (MPa)

Leakage Rate (cc/ sec)

≤0.5%

Voltage sensors

CT ABC 10P10 5VA

400:05:00

Incoming side and outgoing side of the voltage sensor

6 Voltage sensor(built-in)

Phase voltage:(24(36)kV/√3)/(3.25V/√3)

Special attention should be paid to the voltage sensor, which must be directly fed by theLBS load break switch.

No additional adjustment circuit can be added to the controller. The voltage signal of the switch into the test line needs to be tested separately.

As a reliable electric power equipment company, we also have types of electrical control boxfor sale, if you have needs, please contact us.



Send product request

To: Zhuhai Gopower Smart Grid Co; LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

11KV Auto Recloser Vacuum Circuit Breaker
11KV Auto Recloser Vacuum Circuit Breaker ZW32 series 11 kv breakerare used in distribution systems. 11kv auto reclosers are used to make and break normal and fault currents. 11kv outdoor c...
VCB Pole Mounted Recloser
VCB Pole Mounted Recloser ZW32 series automatic circuit line recloser, produced by our vacuum circuit breaker company, are used in distribution systems. Auto distribution li...
SCADA Remote Terminal Unit RTU
SCADA Remote Terminal Unit RTU As one of the top SCADA RTU manufacturers,Remote terminal unit scada is a general term for various remote monitoring installed in the distribution ...
11KV Auto Recloser Vacuum Circuit Breaker
11KV Auto Recloser Vacuum Circuit Breaker 11KV Auto Recloser Vacuum Circuit Breaker ZW32 series 11 kv outdoor vcbvacuum circuit breakers are used in distribution systems and pole mounted r...
SF6 Gas 11 KV Load Break Switch
SF6 Gas 11 KV Load Break Switch The 11 kv load break switchis suitable for the distribution network with the highest voltage 11kV, the rated current 630A, and the rated frequency ...
All supplier products

Same products

Temperature Controller
Temperature Controller Seller: Tinko Instrument (Suzhou) Co., Ltd. Tinko temperature controller industrialcan improve process efficiency, product quality and minimi...
Sequence Valve Gate Controller
Sequence Valve Gate Controller Seller: Tinko Instrument (Suzhou) Co., Ltd. Tinko hydraulic valve gate controllerenables control of valve gate flow sequence and timing for p...
TSC-02 Stand Alone Controller
TSC-02 Stand Alone Controller Seller: Tinko Instrument (Suzhou) Co., Ltd. Tinko TSC-02 integrated dual zone temperature controlleris suitable for small mold. The portable ...
TSC-01 Stand Alone Controller
TSC-01 Stand Alone Controller Seller: Tinko Instrument (Suzhou) Co., Ltd. Tinko TSC-01 integrated single zone hot runner temperature controller is suitable for small mold....
Touch Screen Hot Runner Controller
Touch Screen Hot Runner Controller Seller: Tinko Instrument (Suzhou) Co., Ltd. M20 series touch screen hot runner temperature controllers are newly developed with latest achiev...