Salt Spray Corrosion Test Chamber
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
This chamber is widely used in industries and laboratories to assess corrosion resistance and durability of materials under accelerated environmental conditions:
Photovoltaic Modules and Backplates: Salt spray corrosion resistance testing.
Metal Plated Parts: Evaluation of corrosion resistance for zinc, nickel, chromium plating, etc.
Coating Materials: Research on organic coatings and powder coatings corrosion resistance.
Anodized Aluminum and Protective Films: Durability and longevity testing.
Anti-Rust Oils and Surface Treatments: Performance verification of corrosion protection.
Marine, Automotive, and Transportation Components: Corrosion resistance assessment.
Electronics, Electrical, and Outdoor Machinery: Salt spray aging testing.
Accelerated Aging Experiments and Quality Control: Laboratory evaluation for product development and QC.
Standards
The chamber is designed to comply with international and domestic corrosion testing standards, including but not limited to:
GB/T 2423.17-2008 – Environmental Testing for Electric and Electronic Products, Salt Spray Test Method
GB/T 10125-2012 – Salt Spray Test
IEC 61701-2011 – Salt Mist Corrosion Testing of Photovoltaic Modules
ISO 9227-2017 – Corrosion Tests in Artificially Created Salt Atmospheres
Parameters
| Item | Technical Parameter |
|---|---|
| Chamber Volume | Approx. 3.8 m³ |
| Internal Dimensions | 1200 × 1600 × 2500 mm (W×H×D), excluding sloped top height |
| External Dimensions | 2000 × 2400 × 2800 mm (W×H×D), excluding control cabinet |
| Control Cabinet Size | 600 × 1500 × 1000 mm (W×H×D) |
| Solution Tank Size | 600 × 600 × 1000 mm (L×W×H) |
| Weight | Approx. 1000 kg |
| Base Load Capacity | Approx. 200 kg |
| Noise Level | ≤70 dB (1 m in front, 1.2 m above ground) |
| Max Power | 26 kW |
| Max Current | 60 A |
| Power Supply | AC 380V, Three-phase Four-wire + Protective Ground ±10%, 50±0.5 Hz |
| Temperature Range | RT – 55℃ |
| Pressure Tank Temperature | RT – 63℃ |
| Relative Humidity | 30 – 95% RH |
| Relative Humidity Deviation | +2%, -3% |
| Temperature Resolution | 0.1℃ |
| Temperature Deviation | ±1℃ |
| Temperature Uniformity | ≤2℃ |
| Temperature Fluctuation | ≤±1℃ |
| Salt Spray Deviation | ≤±1% |
| Spray Rate | 1–2 ml/80 cm³ |
| pH Value | 6.5 – 7.2 |
| Spray/Static Time | 1 min – 9999 h, programmable cycles |
| Heating Rate | Chamber RT→50℃ ≤60 min; Tank RT→63℃ ≤60 min |
| Sample Capacity | At least 2 modules (2000×1000×38 mm) |
Accessories
Standard Configuration: Salt spray chamber main body (inner chamber, pressure tank, circulation spray system, heating system, control system)
Standard Configuration: Control cabinet with PID program control for real-time monitoring
Standard Configuration: Sample holder accommodating at least 2 modules (2000×1000×38 mm)
Consumables: Sodium chloride (chemical/analytical grade) for preparing 5% ±0.1% salt solution
Consumables: Deionized/distilled water for solution preparation
Consumables: Spray nozzles (laboratory-grade, multi-direction adjustable)
Optional: Data acquisition system for recording spray time, temperature-humidity curves, and cycles
Send product request
Other supplier products
 |
Battery Isothermal Calorimeter | Battery Isothermal Calorimeter is a professional instrument developed based on the principle of power compensation isothermal calorimetry for testi... |
 |
Wet Microbial Penetration Tester | The wet microbial penetration tester is mainly used to evaluate the barrier ability of medical protective equipment (such as surgical gowns, isolat... |
 |
Xenon Arc Tester | Features and Benefits 1. A variety of filters are available. For example, daylight filters are used to simulate sunny days, and UV cut-off filters... |
 |
Bone Cement Four-Point Bending Fatigue Tester | Standard YY/T 1429 (China): Specifies four-point bending fatigue tests for acrylic resin bone cements under quasi-static and cyclic loading. ISO ... |
 |
Corrosion Test Apparatus IEC 60754 Part 1 & 2，Corrosion Test Chamber | Description: This tester is used to test the acidity of the gas that released during combustion from cable or optical cable components material; T... |
Same products
 |
Automated Strength Tester for Lead - end of Photovoltaic Modules | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This tester is widely applie... |
 |
Solar Panel Fracture Testing Machine | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The machine is widely applie... |
 |
Conduit Bend Testing Equipment | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The machine is widely used i... |
 |
Wet leakage current test system of photovoltaic module | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The system is applicable to ... |
 |
Automatic sandbag load testing equipment | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The machine is widely used f... |
