Backsheet bonding strength tester for solar modules
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The tester is designed to comply with international and national standards:
(1) GB/T 9535 – Crystalline Silicon Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
(2) IEC 61730-2 – Photovoltaic (PV) Module Safety Qualification – Part 2: Requirements for Testing
Parameters
| Item | Technical Specification |
|---|---|
| Rated Load | 500 N |
| Maximum Peel Force | ≥ 200 N |
| Travel | 210 mm |
| Test Speed Range | 50 – 500 mm/min (digital display) |
| Standard Peel Angle | 90° |
| Peel Angle Range | 0 – 180° (adjustable) |
| Glass Movement Speed | 50 ± 5 mm/min |
| Force Display | Digital display |
Features
Compliant with IEC 61730-2 requirements for PV module backsheet peel strength
Supports standard 90° peel testing and adjustable-angle tests for flexibility
Stable load control and high repeatability of force measurement
Digital speed setting for intuitive and precise operation
High structural rigidity suitable for glass-based PV module testing
Suitable for R&D, type testing, and production quality control
Accessories
(1) Main testing system with loading mechanism
(2) Peel fixture for backsheet clamping
(3) Glass fixation platform for module support
(4) Force sensor with 500 N rated load
(5) Digital display control system for force and speed
(6) Consumable peel clamping components (replace based on use frequency)
(7) Sample preparation tapes or auxiliary fixing materials
Test Procedures
Prepare PV module backsheet peel test samples according to standard size and peel length requirements.
Secure the module glass on the testing platform.
Clamp the backsheet end into the peel fixture.
Set the peel angle (typically 90°) and test speed.
Start the test to perform constant-speed peeling.
Record real-time peel force variations and maximum peel force.
Complete the test and analyze data to determine compliance with standard requirements.
Send product request
Other supplier products
 |
IEC61215 Wet Leakage Current Testing Machine | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Wet Leakage Current Test System is designed for high-precision evaluation... |
 |
Safety shoe impact meter | Whats/App: +86 156 1874 6768 Web: standard-groups.com According to the criteria Bs-953.1870 EN-344. ANSI-Z41 CSA-Z195 ISO K88782 EN ISO 203... |
 |
Surface performance testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Measurement of friction force and friction coefficient of metals, ceramics, po... |
 |
Keyboard Key Durability Testing Machine (for Keyboard Key Life Testing Machine) | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction Key life testing machine can be used to test the life of mobile s, MP... |
 |
IEC 60335 Rice Cooker Tensile Testing Machine Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) IEC 60335-1 Household and similar electrical appliances &ndash... |
Same products
 |
PP Pickling Tank | Seller: Hebei Annuo Automaiton Technology Co., Ltd. | PP Pickling Tank PP Pickling Tank — Polypropylene Pickling Tanks for Hot Dip Galvanizing... |
 |
Galvanizing Tank/Galvanizing Kettle/Zinc Kettle | Seller: Hebei Annuo Automaiton Technology Co., Ltd. | Galvanizing Tank/Galvanizing Kettle/Zinc Kettle Zinc Kettle / Galvanized Kettle for Hot-Dip Ga... |
 |
Galvanizing Furnace | Seller: Hebei Annuo Automaiton Technology Co., Ltd. | Galvanizing Furnace Hot Dip Galvanizing Furnace Manufacturer— Engineered for Your Produc... |
 |
Flue Gas Heat Economizer waste heat recovery | Seller: Hebei Annuo Automaiton Technology Co., Ltd. | Flue Gas Heat Economizer waste heat recovery Flue Gas Heat Economizer – Waste Heat Recov... |
 |
Granite Tanks | Seller: Hebei Annuo Automaiton Technology Co., Ltd. | Granite Tanks Granite Tank — Granite Pickling Tank for Hot Dip Galvanizing The granite ... |
