Recycling for waste tyre to high out fuel oil pyrolysis machine
Working principle:
First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor will be rotating and heated by coal, natural gas, wood or electricity. When the temperature reaches the degree of 250 to 280, we will get the crude oil, the oil steam will be continuous produced until the temperature reaches 350-460°C; oil steam will flow through oil gas separator, light component will enter the condensers and meanwhile the heavy oil will be discharged automatically into in heavy oil tank. The liquefied part will be condensed as crude oil, and the part which cannot be liquefied will be transferred by the water seal back to the burning chamber to be reused as heating material.
If you need, please feel free to contact: Miss. Livia
E-mail: />Whatsapp / / />Tel: 86 , />Company: Xinxiang Lifeierte Filter Corp., LTD
Web in English: / Web in Thai: th.le-filter.com
Add: No. 9 Hongli Road, Muye District, Xinxiang City, Henan Province, China.
Send product request
Other supplier products
 |
HOT!! Y type fire fighting strainers DN20 | INTRODUCTION:Y type strainer is usually used at the inlet end of reducing valve, decompression valve, level control valve and other equipment to cl... |
 |
tyre pyrolysis machine/ high capability waste tire recycling oil machine | Working principle:First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor wil... |
 |
Environmental Friendly High Temperature Resistance Pulse Type Dust Collector | Introduction: Long bag off-line pulse dust remover is mainly composed of upper tank, middle tank, ash hopper, air inlet flow pipe, bracket, filter... |
 |
Pulse-jet bag type dust collector | 1)Pulse-jet bag type dust collector is mainly used for mines, cement plants, coal-fired boiler plant, brick kiln factory, carpentry furniture facto... |
 |
tyre pyrolysis plant | Working principle:First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor wil... |
