Corrugated Metal Gasket
Description: Corrugated Metal Gasket consists of a metal core with concentric grooves on both sides, coated with expanded graphite or PTFE layer. The thickness of metal can be thinner, e.g. 3mm, 2mm, 1mm, 0.5mm, compared with Kammprofile gasket, and the corrugation pitch is 3mm, 4mm or 6mm depending on the width of the sealing face.
APPLICATION:
ZT-900 have been proven to be both reliable and cost-effective for flange and heat exchange application, especially used in low-pressure applications in large diameter flue gas ducts at high temperature, also suitable for uneven or distorted sealing surfaces. It eliminates the problem of difficult handing with large non-metal gaskets used in those applications.
ADVANTAGES:
◆Outstanding mechanical strength and thermal conductivity
◆Capable of withstanding high temperature
◆There are almost no limitations regarding size
◆Choice of insert metals easier
◆Trouble-free for handling and installation even for large size
MATERIAL:
Metal material Din
Material No. Hardness
HB Temp.
0C Density
g/cm3 Thick.
mm
CS/Soft Iron 1.1003/1.0038 90~120 -60~500 7.85 0.5mm; 1mm
2mm; 3mm
4mm
SS304, SS304L 1.4301/1.4306 130~180 -250~550 7.9
SS316, SS316L 1.4401/1.4404 130~180 -250~550 7.9
Other special metal is also available on request.
Materials for the insert:
Flexible Graphite, PTFE, Non-asb, etc
Normal with thickness 0.5mm, 1mm, 1.5mm
Other supplier products
|
Spiral Wound Gasket |
Description:ZT-600 Spiral-Wound gasket is formed of V-shaped metallic stripe and soft non-metallic filler by means of piled, spiral wound and conne... |
|
Double Jacketed Gasket |
Description: Double Jacketed Gasket is made from graphite, ceramic, non-asbestos etc. filler covered with thin metal jacket, such as stainless ste... |
|
Spiral-Wound gasket |
Description:ZT-600 Spiral-Wound gasket is formed of V-shaped metallic stripe and soft non-metallic filler by means of piled, spiral wound and conne... |
|
Corrugated Metal Gasket |
Description: Corrugated Metal Gasket consists of a metal core with concentric grooves on both sides, coated with expanded graphite or PTFE layer. T... |
|
Reinforced Graphite Sheet |
CONSTRUCTION:
ZT-410(Graphite Sheet Jacketet Tanged Metal) is made by materials of three cascades. A laminated graphite is inserted into a conve... |
All supplier products
Same products