high pressure locking tube machine in model 75
1. The usage
The machine is an enhanced type of a high pressure locking tube machine in model 75, which is the special equipment for pressing the tube end of a high pressure rubber tube with a outer cover and a core together for the production or repair a hydraulic support.
2. The composition and the main technical characters
The machine is composed of a locking & pressing mechanism, a motor, a gear pump, a control valve and an oil tank.
The locking & pressing forc 914T
The motor model： Y132M-4
The power： 7.5KW
The rotation speed： 1440r/min
The gear pump model： CBF-E540-ALPL
The relief valve model： YF-L20H3-S
The reversal valve model： 34SM-L20H-W
The oil tank capacity： 100kg
The equipment size(L×W×H)： 2000×850×1500
The weight： 1200kg
Other supplier products
|
|
4D-SY（6.3—80MPa）electric hydraulic test pump |
MODEL rated exhaust pressure MPa Flux L/h Plunger Diameter Reciprocating time mating Motor powder KW Overall Size
LxWxH
(mm) Weight
kg
High Pres... |
|
|
GFM8-2 powder filler |
GFM8-2 powder filler is a new product developed and designed by our factory in combination with the characteristic of actual filling with reference... |
|
|
Model WDG1.7 nitrogen filler |
Model WDG1.7 nitrogen filler (referred to as filler hereinafter) can be used for filling nitrogen to cylinders to be pressurized by nitrogen in the... |
|
|
DX68-B pipe locking machine |
Model DX68-B pipe locking machine is mainly used for buckling processing for high pressure rubber pipe assembly in the mechanical engineering. It c... |
|
|
S-Sy series manual single casing test pressure pump |
Model S-Sy series manual single casing test pressure pump (hereinafter referred to as the pump) is the equipment which obtains liquid high pressure... |
All supplier products
Same products
