What Can the Three-drum Dryer Do for You?
Three-drum dryer, also named as three-drum drying machine, has been widely used nowadays. As its name implies, the three-drum dryer is made up of three drums. It is specially used to dry the large-sized materials like yellow sand and stones. The finished products can be used as building materials for construction engineering. Raw materials like yellow sand in mortar industry, moulding sand in casting industry and blast furnace slag in cement industry are all available for three-drum drying machine.
It is much better to use the raw materials without the ability to adhere on the drum wall or lifting boards. Temperature of hot air, being used for heat exchange with raw material, should be no more than 750 ℃. If there are special requirements, the interior wall and lifting boards, being equipped in the feeding mouth, should be made by the heat-resisting steel sheets and plates.
As the first choice for the production lines of mortar or mineral slags, thethree-drum dryerwith thermal efficiency more than 70% is not picky to the fuels like coal, natural gas or oil. Materials in the shape of briquette, particle and powder are all available for three-drum drying machine as long as the size is smaller than 20mm.
If you are interested in the three-drum dryer ofFote Machinery, please leave messages our official website or directly us at We will reply to you as soon as possible. Sincerely welcome you to come for site visit and inspection. Looking forward to working with you in the near future.
Fote Heavy Machinery:
Fote Official Email:
Send product request
Other supplier products
All supplier products
Drying Details of Fote Sludge Drying Machine
The drying process of slurry dryer can be classified into three stages. They are drying at high temperature, water draining at medium temperature a...
Filter Devices Equipped for Fote Coal Slime Dryer
During the working process of coal slime dryer, dust is easy to be produced if materials to be dried are in briquettes, pellets or balls. What&rsqu...
Points Related With Work of Hydraulic Cone Crusher
The matching of feeding size should be suitable. Service life of hydraulic cone crusher will be seriously influenced if materials are too coarse or...
Maintenance Work for the FTM Straw Pellet Mill
As to the maintenance work for straw pellet mill, it should start from the first run of straw pellet mill. After each run, you should clean the str...
Efforts of Fote to Make Hydraulic Briquette Press
Hydraulic ball press machine, also named as hydraulic briquette press machine, is an amazing machine with the ability to turn wastes into things of...
Same products
Y9-35-13.5D-75KW with volume 2834-2893 pressure POPULA boiler centrifugal induced draft fan
Seller: Popula Group Company Limited
Puduct Name:
Y9-35-13.5D-75KW with volume 2834-2893 pressure POPULA boiler centrifugal induce...
Ultrasonic Computerized Tape Cutting Machine (Right Angle) JM-2100
Seller: Zhejiang Huaqi Information Technology Co., LTD
Fully automatic cutting, easy operation. Wide application range, high cutting quality, smooth cut...
24 Cavity Cap Compression Machine
Seller: Zhejiang Huaqi Information Technology Co., LTD
The 24 Cavity Cap Compression Machine is an advanced piece of equipment designed to meet the dema...
24 Cavity Cap Compression Machine
Seller: Zhejiang Huaqi Information Technology Co., LTD
The 24 Cavity Cap Compression Machine is an advanced piece of equipment designed to meet the dema...
SWT-UME Hot Air Welder Pvc Tarpaulin
Seller: HEBEI MINGMAI TECHNOLOGY CO.,LTD
SWT-UME Banner Hot Air WelderVoltage: 220V/110VPower: 3000W/2200WFrequency: 50/60HzTemperature: 2...
