NHRS 45 degrees/90 degrees Automatic Subdivision Quartered Additional Angle Hydraulic Indexing Power Chuck
(1). NHRS chuck can be 4 x 90 degrees indexing also added 3 degrees, 4 degrees, 5 degrees additional indexing;
(2). Parts once clamping, Machinable more than 4 sides.
(3). NHRS chuck replacement claws, connection and NHR as easy.
(4). Chuck diameter range: 360 or more mm
(5). Material: Steel.
(6). According to product design drawings dedicated tooling.
(7). Can provide a complete hydraulic system, including the chuck body, connecting plate, tooling, oil separator, hydraulic station.
(8). Chuck by quenching and grinding treatment, anti-deformation design, to ensure rigidity and accuracy, easy installation.
Other supplier products
|
|
PU/PUT 2-Jaw / 3-Jaw Slant-Column Pull Back Draw Down Power Hollow Chuck |
(1). PU/PUT hollow slant-column pull back chuck is suitable for machining the workpiece with the requirement of positioning, verticality and parall... |
|
|
NHRR 45 degrees/90 degrees Quartered Center-Clamped Hydraulic Indexing Power Chuck |
(1). NHRR chuck is based on the NHR chuck, redesign and improvement; (2). NHRR chuck is designed to solve (precision castings, fittings, etc.) due ... |
|
|
KV-A 3-Jaw Large Clamping Range Vertical Lathe Hydraulic Power Chuck |
(1). KV-A large vertical lathe chuck has 15 inch, 18 inch, 21 inch,24 inch,28 inch,32 inch size specifications to choose . (2). For the processing ... |
|
|
MDS/MDL 3-Jaw / 6-Jaw Diaphragm Clamping Power Chuck For Gear Processing |
(1). Diaphragm chuck is a fully sealed chuck, 3-jaw type, 6-jaw type to choose. (2). It is based on the outer diameter of the gear P.C.D for clampi... |
|
|
PUE 3-Jaw Slant-Column Pull Back Draw Down Power Chuck for I.D. |
(1). PUE I.D. slant-column pull back chuck is suitable for machining the workpiece with the requirement of positioning, verticality, concentricity ... |
All supplier products
Same products
