Fabric thermal protection radiation performance tester
Standards:
ISO 6942
Product description:
Thermal protection performance tester used for the determination heat radiation performance of the single or multi-layer fabric in high temperature environment.
The heat radiation performance is an important performance index of flame retardant products, accurate determination of its protective properties, which it is very
important to select materials, research new products and improve the processing technology.
Method A: The sample is mounted in a separate frame and exposed to a heat radiation source for a certain time. The intensity of the thermal radiation is controlled by
adjusting the distance between the sample and the radiation source. After the test, the visual changes at each level of the sample were examined.
Method B: The sample is fixed to a calorimeter and exposed to a thermal radiation source. The time required for the temperature of the calorimeter to rise by 12°C and 24°C, respectively, was measured.
On the basis of these data, the heat flux rate is calculated by the difference of the heat fluxes between the transfer and the incident.
The cooling system provides a continuous flow of water fromthe inlet and outlet of the testing machine.
Technical Parameters:
Samples: textiles
Test standard: DIN EN ISO 6942
Sensors: Calorimeters
Power supply: 3 ~ 400 VAC / 12.5 kVA
Equipment Dimensions: 2000 x 800 x 1500 mm (W*D*H)
Weight: 150 kg
Send product request
Other supplier products
 |
Water Vapor Permeability Testing Apparatus | Introduction:The device is a constant temperature and humidity moisture permeability test device, which is suitable for sportswear and other requir... |
 |
falling-pendulum fabric tearing strength elmendorf tester | Standards: ASTM D1424/D689, NEXT 17, M&S P29, BE EN ISO 13937/4674, BS 4468, DIN EN 21974, GB/T 3917.1, ISO 1974 Applications: Digital Elmen... |
 |
Toy burning tester | The Toy burning tester is designed to determine the safety property (flammability) of equipment, and the fire-proof performance of toys and raw mat... |
 |
Mask Synthetic Blood Penetration Tester | Standards: GB 19083-2010 Technical requirements of medical face masks - Anti-penetration property of 5.5 synthetic blood. YY/T 0691-2008 Clothin... |
 |
Face Mask Field of Vision Tester | Mask Visual Field Testerintroduction: To determine whether field of vision under the mask meets the standard requirement or not. Feature: Hemi... |
Same products
 |
Bakon BK191: The Ultimate Tool for Soldering Iron Temperature Control | Seller: Shenzhen Wikshu Technology Co. | Description Bakon BK191 iron tip thermometer tester (0 - 600°C) For soldering repair, ... |
 |
MaAnt BGA Solder Paste Halogen-free Lead-free Repair Flux | Seller: Phonefix | MaAnt UP-79 MY-224 MY-225 halogen-free solder paste for mobile phone/electronic circuit board CPU... |
 |
3 Inch Ceramic Bond Hybird Transitional Polishing Pads For Concrete | Seller: Xiamen ChinShine Industry and Trade Corporation | – Available Grits: 30, 50, 100, 200,400. – Use wet or dry. Pad Materials –... |
 |
LUOWEI LW-PT03 LW-PT02 Silicone Pad for CPU Chip Tin Planting | Seller: ShenZhen VIP FIXPHONE Technology Co., Ltd, | Description LUOWEI LW-PT03 LW-PT02 CPU Chip Tin Planting Platform with Heat-resistant Si... |
 |
AWithZ UF20B Super Farad Capacitor Spot Welder for Battery Motherboard PCB Welding | Seller: Shenzhen weikexiu technology Co.,Ltd | Description AWithZ New Farah capacitor UF20B spot welding machine Energy gathering weldi... |
