Valve Tappet Eddy Current Flaw Detector QMTZET-04
Tappet full automatic eddy current testingsystem is a full automatic crack hardness sorter that integrates light, electricity and machinery. The whole system includes a main control system, charging system and mechanical transmission system. The workpiece is sent to the area to be inspected by clamping and transverse moving. The workpiece surface is scanned by a point probe, which can inspect the outer circle, bottom surface and chamfered end surface of the tappet at the same time. At the same time, the system also supports automatic charging, automatic detection and automatic sorting. It can also be connected to the production line of the factory and can be selected for off-line automatic detection and sorting.
Valve Tappet Eddy Current Flaw Detector QMTZET-04 Brief Introduction
The tappet of the valve top-mounted gas distribution mechanism is generally made into a cylinder to reduce the quality. The roller type tappet is a kind of tappet, which has the advantage of reducing the lateral force against the friction caused by the friction. This kind of tappet is complex in structure and large in mass and is generally used on large-bore diesel engines. The tappet is usually made of nickel-chromium alloy cast iron or cold-alloy alloy cast iron, and the friction surface should be ground after heat treatment. There are three types of tappets: bacteria, cartridge, and roller.
The automobile engine valve tappet is an important gasoline engine component. In the engine valve type gas distribution mechanism, it is composed of a valve group and a valve transmission group, and the tappet is a main component of the valve transmission group except for the camshaft. The valve tappet is the follower of the cam. Its function is to transmit the motion and force from the cam to the valve while also receiving the lateral force exerted by the cam and transmitting it to the cylinder head. In the course of service, the valve tappet fails to break in advance due to quality reasons, which causes the valve guide, valve and timing chain to break and fail successively. After the engine is turned off, the engine cannot be started, which eventually causes the engine to be scrapped.
If you want to know more about tap testing ndt, please visit our website.
As one of ndt equipment manufacturers, we will do our best to meet all the needs of customers.
Send product request
Other supplier products
 |
BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator | Eddy Current Brake for Sale Stimulating the coil makes a magnetic induction to the tested material. The induced electromotive force received by th... |
 |
Eddy Current Testing Equipment for Tube, Bar and Wire | ECT Eddy current testing is a ndt testing equipment, which mainly uses the electromagnetic field and electromagnetic induction between metals to de... |
 |
MFL-7389 Tube Magnetic Flux Leakage Detector | Tubing repair is an important measure to reduce the comprehensive cost of production in oil production plants to improve the quality of repairing t... |
 |
EDM Notch | Nanjing BKN Automation System Co., Ltd., originated from the eddy current testing laboratory of the Nanjing University of Technology. It is an eddy... |
 |
Eddy Current Testing Equipment for Tube, Bar and Wire | ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals ... |
