Friction Charging Tester

• 

Friction Charging Testeris the antistatic fabric and knitted fabric friction generated by the amount of charged charge test equipment, used to measure the amount of static electricity charge.

Standards compliant:
JIS L-1094; JIS T-8118; ZB W 04008-89; GB / T12703.2-2009; GB 12014-2009; GB / T23316-2009

Calculation formula:
Q = CV / A
Here, C: the charge amount of the capacitor (F) = 0.1 × 10-6 (F)
V: Voltage reading of potentiometer (V)
A: friction area of ​​sample (m2) = 0.25 × 0.25 (m2)

Steps:
1, connecting the Faraday tube and the amount of charge measurement device: the end of a dedicated cable connected with the input of the charge meter connected to the other end of the Faraday tube with the outer cylinder of the socket connection.
2, turn on the charge amount of the tester power - the power switch up to the "1" position.
3, press the "clear" button, so that the charge meter shows the number is zero.
4, with a roller friction machine friction test, immediately after the end of the friction with the insulation rods into the Faraday tube tube inside the tube. In this process the specimen and other objects should be kept above 300mm.
5. Read the reading on the charge quantity measuring device.

Friction Charging TesterNote:

• 1, the system of Faraday tube outer cylinder should be reliably grounded.
• 2. Clear the charge amount measurement unit before each measurement.
• 3, the measured object must be measured from the power supply.
• 4, before the test, please turn on the power switch to make the machine warm up for 15 minutes.
• 5, voltage / current generator is not to sell goods.

• Friction Charging TesterMain accessories:

  Voltage meter (R8240): 1 set
  Capacitor: 1 set
  Cable (A01009-200): 1 root
  Connection cable (A01009-50): 1 root
  Power supply-type strip in addition to the electrode: 1 root
  Friction abutment / ground pad (nylon friction cloth): 1 set
  Insulated rods (20Φ x 500L mm acrylic clear fiber): 1 root
  Certificate of proof of voltage meter (traceability): 1 book

Other supplier products

	Bally Waterproofness Tester	Bally Waterproofness Tester is to test materials like coated leather, leather dynamic water penetration resistance ability. The material would be p...
	astm d3786 hydraulic bursting strength tester	Digital bursting strength tester is used for the detection of woven, knitted, non-woven fabrics, paper or board about the bursting strength and hei...
	ISO 4920 spray water repellency tester	Spray Rating Tester /Fabric surface waterproof performance tester is designed to determine the surface wetting resistance of any fabrics, which may...
	Taber Multi-Finger Scratch / Mar Tester with a pneumatically driven	Multi Finger Scratch/Mar Tester uses tungsten carbide as a scratch to accurately detect surface damage caused by unconventional physical forms (suc...
	Heel Fatigue Tester	Heel Fatigue Tester is used to determine the resistance of medium and high heels of ladies’ shoes under repeated small impacts to the heel ti...

Same products

	Bakon BK191: The Ultimate Tool for Soldering Iron Temperature Control	Seller: Shenzhen Wikshu Technology Co.	Description Bakon BK191 iron tip thermometer tester (0 - 600°C) For soldering repair, ...
	MaAnt BGA Solder Paste Halogen-free Lead-free Repair Flux	Seller: Phonefix	MaAnt UP-79 MY-224 MY-225 halogen-free solder paste for mobile phone/electronic circuit board CPU...
	3 Inch Ceramic Bond Hybird Transitional Polishing Pads For Concrete	Seller: Xiamen ChinShine Industry and Trade Corporation	– Available Grits: 30, 50, 100, 200,400. – Use wet or dry. Pad Materials –...
	LUOWEI LW-PT03 LW-PT02 Silicone Pad for CPU Chip Tin Planting	Seller: ShenZhen VIP FIXPHONE Technology Co., Ltd,	Description LUOWEI LW-PT03 LW-PT02 CPU Chip Tin Planting Platform with Heat-resistant Si...
	AWithZ UF20B Super Farad Capacitor Spot Welder for Battery Motherboard PCB Welding	Seller: Shenzhen weikexiu technology Co.,Ltd	Description AWithZ New Farah capacitor UF20B spot welding machine Energy gathering weldi...