Precision Hastelloy slicer
Used to detect the production of accurate fiber cross-section of the sample material, in order to facilitate the fiber cross-section under the microscope for further testing or research.
The main purpose:
ThePrecision Hastelloy sliceris used to detect the sample material that produces the precise cross section ofthe fiber so that the fiber cross section is further examined or studied under a microscope.
Standards compliant:
ASTM D2130, BS 2043, DIN 53811, ISO 137, IWSTM 24, IWTO 8-6
Scope of application:
1, fiber profile;
2, the thickness of the epidermis;
3, the type of medulla, pattern, contour and location;
4, the distribution of pigments;
5, dye penetration.
Precision Hastelloy slicerdetection method:
A layer of defatted fiber is inserted into the upper part of the microtome of the slicer, and the inserted media is suitable for the fiber bundle and can be dried. The fiber bundle is then placed on the ejector and the micrometer is used to determine the desired fiber sample thickness. Cut the blade.
Precision Hastelloy slicerdetection steps:
1. Turn the micrometer to the end;
2. Remove the two screws from the cover and remove the cover;
3. The fiber from below through the cover of the small holes, revealing a small cut;
4. Tighten the screws on the cover plate, push the push plate to the side of the hole, press the fiber, lock the nut on the push plate;
5. Cut the fiber along the cover with the blade;
6. Turn the micrometer to expose the required fiber thickness;
7. drop on the fire cotton;
8. Cut the fiber along the cover with a blade.
Other supplier products
|
|
fabric surface wetting resistance tester |
Spray Rating Tester /Fabric surface waterproof performance tester is designed to determine the surface wetting resistance of any fabrics, which may... |
|
|
Horizontal flame test chamber |
The Horizontal Flammability Tester is designed for determining the comparative burn rates and burn resistance of textiles, particularly those for a... |
|
|
Horizontal flammability tester |
Horizontal Flammability Tester
Standards:
ISO 3795, FMVSS 302, DIN 75200, SAE J369, ASTM D5132, JIS D1201, AU 169
Applications:
The Horizontal Fl... |
|
|
Precision Fiber Microtome |
Precision Fiber Microtome
Testing Standards:
ASTM D2130, BS 2043, DIN 53811, ISO 137, IWSTM 24, IWTO 8-6
Applications:
Precision Fiber Micr... |
|
|
45 degree flammability tester |
Testing Standards:ASTM D1230, FTMS 191-5908, CFR 16 Part 1610, CALIF TB 117, NFPA 702, GB/T 14644Applications:45 degree flammability tester is desi... |
All supplier products
Same products
