Luminous Afterglow Performance Tester
Luminous Afterglow Performance Tester
The luminous afterglow performance tester is suitable for testing the luminous afterglow performance of various textiles. Fibers, yarns, and powders can all be tested.
Applicable Standards
GB/T 43716 - 2024 Textiles - Test Method for Luminous Afterglow Performance - Photometer Method
Testing Principle
Use the specified light source as the excitation light source. Under the specified illuminance conditions, directly irradiate the sample. After the sample is excited to saturation, remove the excitation light source, and measure the afterglow brightness and decay time on the sample surface through a brightness meter.
Instrument Features
Automatically record the brightness value within the set time through software. Fully automatic measurement, simple operation, capable of long-time measurement, and automatically save data.
Multiple light-shielding designs in the fully enclosed test chamber reduce the influence of external light sources on test results.
Automatically switch test samples. One set of samples can be tested at a time for 3 groups.
Specially made imported sensors with fast sampling speed and high accuracy.
Wide testing range, covering powders, fibers, yarns, fabrics, etc.
Standard Configuration
1 main unit
1 Lenovo integrated computer
1 Lenovo laser printer
3 sample clamps
1 excitation light source
Technical Parameters
Excitation light source: Fluorescent lamp, color temperature (6500 ± 500) K
Brightness meter: 0 - 10000 mcd/m², resolution: 0.01 mcd/cm², accuracy: ±5%
Illuminometer: 0 - 10000 lx, resolution: 0.1 lx, accuracy: ±4%
Approximate weight of the whole machine: 30 kg
Power supply: AC 220V/50Hz
Approximate external dimensions: 375 x 500 x 598 mm (W x D x H)
Send product request
Other supplier products
 |
Dry heat shrinkage tester | Meet the standard GB/T9101-5.4-2017.GB/T9102-6.8-2016.GB/T19390-7.4.1-2023.ASTM D4974-2002. etc Scope of application It is used to test the dry ... |
 |
Film punching machine | Meet the standard: GB/T1528; GB/T529; GB/T8083; GB/T 15340.ASTM Technical parameters: Travel range :100mm Blanking force: about 20kN Table s... |
 |
Seat Ingress/Egress Simulation Tester-QINSUN | Standard ISO 16840(Wheelchair Seating - Test Methods for Determining Mechanical Properties) FMVSS 207(Federal Motor Vehicle Safety Standard for... |
 |
Qinsun SUNTEST XXL+ | Qinsun SUNTEST XXL+is a large xenon lamp weathering and photoaging tester that complies with various ISO, ASTM, and ICH industry standards. The e... |
 |
Textile Bonded Door Drench Tester | I. Product Overview TheTextile Bonded Door Drench Testeris a specialized instrument designed to evaluate the water resistance and durability of te... |
Same products
 |
Air Intake Filter Test System | Seller: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | Seller: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | Seller: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | Seller: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
