KES - QM Contact Coolness Tester
It is used to measure and evaluate the contact coolness index "q max" (peak heat flux). When the skin comes into contact with fabrics, different amounts of heat are transferred, resulting in varying coolness sensations. This instrument can be used to evaluate fabrics with a cooling sensation in summer, as well as underwear fabrics with a contact cooling sensation in winter, and so on. In terms of features: It is designed by simulating the human touch feeling, which enables more accurate measurement of the maximum heat transfer amount. It also has the option to measure thermal conductivity and thermal insulation. For the measurement of thermal conductivity, the heat transfer performance is measured through the sample between hot plates with a fixed temperature difference. For the measurement of thermal insulation, the sample is placed on a hot plate with a fixed temperature, and the thermal insulation rate is calculated according to the heat loss of the sample. There are two measurement methods: the dry method and the wet method. The measurement cases cover various evaluations, such as the coolness of mattresses and the cooling sensation of cooling patches. It is equipped with a touch screen for data display and can automatically perform continuous measurements 10 times in a single test, which improves the measurement accuracy. It complies with multiple standards, including GB/T 35263 - 2017. It can also be connected to a PC for data output (optional). The qmax value is displayed using dedicated software, and the data is saved in CSV format, making it convenient for export and use.
Other supplier products
|
|
Pumpability tester |
Product Introduction
The pumpability tester is dedicated to accurately testing the pumpability of the shield tail seal grease used in shield const... |
|
|
Fabric ici pilling and snagging box-QINSUN |
Standard
GB/T 4802.3: China’s national standard for textile pilling resistance.
BS EN ISO 12945-1: European standard for wool-based textile... |
|
|
Locomotive wire dynamic cutting through tester |
Applicable standards:
Test requirements inEN50305EN50306:2002
Main functions:
1. Fix the sample on the steel platform, place the indenter with... |
|
|
Paper absorbance tester |
Introduction:
It is an instrument used to determine the surface water absorption of coated paper and cardboard, including corrugated board. It is ... |
|
|
Cantilever Fabric Stiffness Tester |
Standard
ZB WO4003. GB/T18318. ASTM D 1388. IS09073-7. BS EN22313
Application
Fabric Stiffness Tester, is a practical equipment to determine the... |
All supplier products
Same products
