Wire and cable smoke density tester
Product Introduction:
STD AOTSI-NBS smoke density test chamber, also known as smoke dense bottom test chamber, the test method comes from the National Institute of Standards and Technology NIST(the predecessor of NBS)， and has been promoted and applied in many test areas. The test method can be used to detect the smoke density grade of plastic products, non-metallic materials of rail transit, non-metallic materials of ships, wire and cable products, etc. According to the test method, the generally applicable standards are ASTME662. ISO5659-2 and NES711 smoke density test method in the military national standard; Compared with the previous building materials smoke density tester method, the test standard has a more accurate test result, and the optical sensor uses a more sophisticated optical telecommunication tube, which can capture the change of the smoke content in the box; If you choose other test devices, such as Draeger gas detection tube, you can carry out aviation standard smoke toxicity test, and FTIR Fourier infrared transform device docking, you can complete the smoke content of the flow must be analysis, etc.
Meet the standard:
ASTM American Society for Materials and Testing :ASTME662. ASTMF814
BS British Standards Institute :BS6401:1983
DIN German Standards Association :DIN5510-2
IS0 International Organization for Standardization :ISO5659-2:2012
EN Euro M standard :CSNEN45545-2+A1:2015
IMO International Maritime Organization :IMO FTPC Part 2
GB China standard :GB/ T8233:2008
NES British Naval Engineering :NES711
NFPA National Fire Protection Association :NFPA 258
Specification：
| Item | Dimensions |
| Dimensions | 3,450(W) × 3,160(D) × 3,450(H)mm |
| Workbench Dimensions | 600(W) × 750(D) × 1,600(H)mm |
| Power Supply | AC 220V, 50/60Hz, 20A |
| Weight | 2,500kg |
| Total Ventilation Area | 50cm² ± 10cm² |
| Instructions | Includes |
| Tools | Computer, compressed air, vacuum cleaner |
Send product request
Other supplier products
 |
Geotextile equivalent aperture tester (wet sieve method) | Scope of application: The equivalent pore diameter of geotextile and its related products was determined by wet screen method. The geotextile samp... |
 |
Automobile Seat Frame Strength Test Bench | Applicable standards: The National Standard of the People's Republic of China (GB) : such asGB 15083. this standard specifies the strength require... |
 |
Taber Abrasion Tester (Double-Head) | Standards DIN Standards: DIN 53754 (plastics), DIN 53109 (paper/board), DIN 52347 (glass/plastics) ASTM Standards: ASTM D1044 (transparent plas... |
 |
Textile Drying Time Tester | Product Overview TheTextile Drying Time Testeris a precision instrument designed to measure the evaporation rate and drying time of textiles under... |
 |
Geomembrane Hydrostatic and Permeability Tester-QINSUN | Scope of application: It is used to test the hydrostatic pressure resistance and permeability coefficient of nonwoven composite geotextile （one cl... |
Same products
 |
Metal Ring-and-Block Friction and Wear Tester | Seller: Standard Groups | This friction and wear tester is designed and manufactured in accordance with the national standa... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard Groups | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
Sliding bearing PV friction testing machine | Seller: Standard Groups | The sliding bearing PV friction testing machine is primarily used to evaluate the friction and we... |
 |
High temperature vacum friction & wear tester | Seller: Standard Groups | High temperature vacuum friction and wear testing machine is mainly used to study the friction an... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard Groups | Dry and wet sand abrasive wear testing machine is mainly used to evaluate the wear resistance of ... |
