Pumpability tester
Product Introduction
The pumpability tester is dedicated to accurately testing the pumpability of the shield tail seal grease used in shield construction. It is an integrated and innovative instrument and equipment of China Railway No. 5 Institute combined with American standards and domestic capillary rheometer. The equipment is made by Changchun Intelligent and used in Beijing Railway No. 5 Institute, with good overall use. At present, the equipment has been used in the polymer laboratory of China Railway Construction in South China. The scale use of the equipment greatly improves the overall performance of the domestic shield tail sealing grease, and provides an effective testing equipment for the further development of the product.
standards
GB/T 3216
GB/T 29531
JB/T 8097
EN 12723
ISO 5198
Performance parameters
- Temperature range: 20——50℃±1℃(optimize temperature control system, improve insulation measures)
- Heating rate: 1-5℃/min, continuously adjustable
- Temperature measurement accuracy: computer display <±0.5℃， resolution: 0.1℃
- Pressure range: 0.5——5Mpa
- Pressure measurement accuracy: 0.05Mpa
- Rated load of the sensor: 5KN
- Load measurement accuracy: ±0.5%FS
- Load force resolution: 0.1N
- Displacement measuring range: <250mm
- Displacement measurement resolution: 0.06mm
- Loading speed setting: 0.01-500mm/min
- Die size: Φ3.8(mm)
- Die roughness: Ra0.4
- Capillary internal roughness: Ra1.6
- Die material: 304
- Plug head diameter: Φ44.83mm
- Power supply: 220V, 50Hz power <1500W
- Dimensions: 580×440×1800mm
Send product request
Other supplier products
 |
Thermostatic water tank tester | Scope of application: Thermostatic water tank is widely used in drying, concentrating, distillation, impregnating chemical reagents, impregnating ... |
 |
SO2 H2S HCL Corrosion Test Equipment | Meeting Standards: Carry out various sulfur dioxide gas corrosion tests in accordance with GB10587 - 89. GB2423.9 - 93. GJB150. QC/T417.1 - 2001 a... |
 |
Taber Abrasion Tester (Double-Head) | Standards DIN Standards: DIN 53754 (plastics), DIN 53109 (paper/board), DIN 52347 (glass/plastics) ASTM Standards: ASTM D1044 (transparent plas... |
 |
Fabric ici pilling and snagging box-QINSUN | Standard GB/T 4802.3: China’s national standard for textile pilling resistance. BS EN ISO 12945-1: European standard for wool-based textile... |
 |
Wyzenbeek or Oscillatory Abrasion Tester | Product introduction: Wyzenbeek wear resistance tester, also known as Oscillatory wear resistance tester, is used to test the wear resistance of f... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
