Qinsun UV-master
In response to the climate resistance testing requirements for outdoor textiles, this equipment can simulate outdoor climate conditions and accelerate testing. Textiles may undergo yellowing, decline, and structural changes under the stimulation of outdoor ultraviolet radiation.
UV testing is conducted by exposing materials to high temperature control conditions and alternating cycles of ultraviolet light exposure and humidity UV uses fluorescent ultraviolet lamps to simulate sunlight, and simulates dew and rainwater through condensation or water spraying. The aging types of textiles include discoloration, loss of luster, powdering, cracking, foaming, brittleness,decline, oxidation, etc
Standards:
ASTM G151 ASTM D4329 D4329 ASTM-D4587.ASTM-G154
Technical parameters:
1. Blackboard temperature setting range:BPT 40-110 ℃; BST 40-120 ℃, but the actual temperature limit of the temperature protection device inside the machine is93 ℃± 10%.
Blackboard temperature control accuracy:± 2 ℃.Blackboard temperature sensors are consumables that require frequent wiping. The surface paint may peel off after a certain period of time, affecting the control accuracy. Therefore, if there is a significant change in color, it needs to be replaced. The specific time depends on the usage situation, usually around two years.
2. Sample size: 48 standard samples of75 * 150mmcan be placed;
3. Sample thickness: The sample thickness shall not exceed 10mm
4. UV wavelength:UVA-340
5. Simulated condensation: The condensation system time can be adjusted
6. Test time: adjustable from0 to 9999
7. Irradiance: adjustable from0 to 1.6w/m2
8. Test time: It can continuously accumulate test time without resetting due to power outages or other factors
9. Irradiance calibration: The irradiance can be calibrated at any point within the set range without changing the program being executed
10. Calibration process: The calibration process achieves automatic input correction to avoid errors caused by manual input
11. UV state, no water, operable
12. Sample space: Large sample space, can be equipped with 3D sample racks
13. Experimental status data can be transmitted through Ethernet cables
14. Lamp lifespan: UV lamp lifespan can reach over 5000 hours
15. Compliant with standards:ASTM G151 ASTM D4329 D4329 ASTM-D4587.ASTM-G154
Qinsun Instruments Co., LTD is a professional laboratory testing instrument manufacturer in China,Have been focusing on laboratory instrument R&D more than 30 years and have rich industry experience,Based on international testing standards,We are also the instrument supplier for BV SGS laboratory,We provide one-stop solutions for lab instruments,Free Training and Turn-Key Service,Products exported all over the world,Offer 36 month warranty and are a trustworthy partner.
Send product request
Other supplier products
| SUGA S80 Carbon Arc Weathering Tester | Applicable Standards The SUGA S80 adheres to globally recognized standards, including: ISO, AATCC, ASTM(e.g., ASTM G152. ASTM D822 for coatings... | |
| Desktop Xenon lamp aging test chamber | TheXenon lamp aging test chamberis a photoaging tester for large-capacity textile testing. With additional sample light frame, temperature sensor a... | |
| Conical twin screw extrusion platform | Product Introduction: The conical twin-screw torque rheometer is composed of main control unit and conical twin-screw unit, which can simulate the... | |
| Fabric Fiber Shedding Degree Tester (Friction)-QINSUN | Instrument Testing Principle Lay the specimen flat and fix it on the holder. Make the wet abrasive attached to the friction head perform reciproca... | |
| Textile Flatness Tester | Product Overview TheTextile Flatness Testeris a precision instrument designed to evaluate fabric surface evenness by quantifying thickness variati... |
Same products
| HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... | |
| PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... | |
| PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... | |
| PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... | |
| PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |













