Durability Tester for Automotive Wire Markings-QINSUN
Test Standard:
Complies with the ISO19642 standard.
Test Method:
For the durability tester of automotive wire markings, fix a wire approximately 300mm long on the machine table with the printed part facing upward. Use a friction hammer equipped with wool felt to rub the printed part with a certain load, speed, and reciprocating stroke, so as to check the fastness of the printed part. It can also be used to test the fastness of the printed characters on the plastic surface.
Main Parameters:
1. Friction speed: 10 - 40 C.P.M, adjustable as desired.
2. Friction distance: 250mm
3. Load: According to ISO19642: 10±1N
4. Wool felt: According to ISO19642: 50X50X3mm, (75% wool, 25% fiber)
5. Test groups: Three groups, which can test three samples simultaneously.
6. Spare parts: 15 pieces of wool felt (50X50X3mm (75% wool, 25% fiber))
7. Counter: Six - digit, up to 999999
8. Motor: 40W
9. Power supply: 220V/50Hz
Qinsun Instruments Co., LTD is a professional laboratory testing instrument manufacturer in China,Have been focusing on laboratory instrument R&D more than 30 years and have rich industry experience,Based on international testing standards,We are also the instrument supplier for BV SGS laboratory,We provide one-stop solutions for lab instruments,Free Training and Turn-Key Service,Products exported all over the world,Offer 36 month warranty and are a trustworthy partner.
Send product request
Other supplier products
 |
Universal Wear Tester(UWT)/Stoll Quartermaster | Application: Universal Wear Tester (UWT) is used to determines the wear and abrasion resistance of fabric used in clothing, footwear and industr... |
 |
Leather Bending Resistance Tester | Applicable Standards The tester adheres to global standards for leather physical testing, including: ISO 5402-1(Leather – Physical and me... |
 |
Anti-glare Panel Falling Weight Tester | Meet the standard GB/T24718-2023，GB/T 24718-2009，JTG/T D33-2012 Scope of application The anti-glare board impact testing machine is designed and... |
 |
Low-Temperature Bending Resistance Tester | Applicable Standards The tester adheres to international standards for material testing at low temperatures, including: ISO 4674-2(Rubber- or pla... |
 |
Water injection counterweight dummy | Product Introduction This counterweight dummy can be filled with water, the torso and the bottom are separated, independently filled with water o... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
