Martindale Abrasion & Pilling Tester-QINSUN
Martindale Abrasion And Pilling Tester
Martindale Abrasion & Pilling Tester To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abrasives at low pressures and in continuously changing directions. The amount of abrasion or pilling is compared against standard parameters.
The unique design of our Martindale abrasion tester allows removal of individual sample holders for examination without lifting the top motion plate. It provides individual counters and parking function, interval time settable and a large touch-screen display. Standard sample holders and 9 and 12kpa Weights are included.
TheMartindale abrasion testeris available with 4. 6. 8 or 9 test positions.
Testing Standards
ASTM D4970. ISO 12945.2. GB/T 4802.2/13775/21196.1/21196.2.
ASTM D4966. ISO 12947. FZ/T 20020. BS 3424-24/5690.
ISO 12947.1/12947.2. M&S P17/P19/P19C,
NEXT 18/18a/18b, ISO 5470-2. IWTO-40. JIS L1096 8.17.5
Method E, Woolmark TM 112/196. BS EN 388/530/13770. ISO 20344
Product Information
The instrument is professionally designed to determine the abrasion and pilling resistance of all kinds of textile structures.
Samples are rubbed against known abradents at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters.
Provided with Touch Screen Controller and unique programming device which includes preprogammable batch and totaliser counters, individual station counters, 4 selectable test speeds with liquid crystal display.
Send product request
Other supplier products
 |
QMD pneumatic high pressure cleaner | QMD air motor driven high pressure tank cleaning machine This QMD air motor-driven three-dimensional cleaners are suitable for small to medium siz... |
 |
Paper stiffness tester | Compliance Standards: ISO 5628、ISO 2493 TAPPI T489、TAPPI T556、JIS P 8125 Product Introduction: ZY-TDY300 microcomputer bending stiffness tester... |
 |
Electronic single fiber strength meter | Compliance Standards - GB/T14337 - GB/T9997 - GB/T13835.5 - GB/T21120 - ISO5079 - ISO11566 - ASTM D3822 - BS4029 Application Scope - Used... |
 |
Aircraft wire wear testing machine | Applicable standards: GJB17.9. MIL-W-81381A, MIL-T-5438 and ISO R1220. 1491 and other standards Main parameters: 1. sand belt length counting ra... |
 |
Fogging Tester | Standards DIN 75201: Automotive trim material fogging resistance. ISO 6452: Coated fabrics fogging behavior in vehicle interiors. SAE J1756: A... |
Same products
 |
Blanket Flammability Test Machine | Seller: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | Seller: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | Seller: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | Seller: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | Seller: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
