Vapor Shrinkage Tester-QINSUN
I. Product Overview
TheVapor Shrinkage Testeris a specialized thermal analysis instrument designed to measure dimensional changes in textiles, polymers, or composites when exposed to steam or saturated vapor environments. It simulates industrial finishing processes (e.g., sanforization) to evaluate shrinkage resistance and dimensional stability of materials.
Type:Environmental test chamber with steam generation
Test Temperature:Ambient +20°C to 100°C
Steam Pressure:0.1-0.3 MPa (adjustable)
Chamber Size:500×500×600mm (W×D×H)
Applications:Textile finishing, geotextiles, medical fabrics
II. Technical Specifications
| Parameter | Specifications |
|---|---|
| Steam Generation Rate | 1.5kg/h (max) |
| Shrinkage Measurement | Laser grid scanner (±0.1mm accuracy) |
| Test Duration | 1-999 minutes programmable |
| Power Supply | 380V/50Hz, 3kW |
| Humidity Control | 95%±3% RH (at 100°C) |
| Dimensions | 1200×800×1800mm (L×W×H) |
III. Key Features
Dual Test Modes:
Static Vapor Mode:Continuous steam exposure
Dynamic Steam Mode:Cyclic steam/air alternation
Advanced Measurement:
3D surface mapping (16.000 measurement points)
Real-time shrinkage rate calculation
Automated sample alignment system
Safety Features:
Pressure relief valve (auto-shutdown at 0.35MPa)
Anti-scald door interlock
Overheat protection (triggers emergency cooling)
IV. Compliance Standards
ISO 6330 (Textile testing - Textile fabrics)
ASTM D3759 (Shrink resistance of fabrics)
AATCC 133 (Dimensional changes in fabrics)
GB/T 8629 (Chinese textile shrinkage standard)
V. Applications
Textile Manufacturing:Pre-shrinkage treatment validation
Quality Control:Batch testing of finished fabrics
R&D:Developing shrink-resistant coatings
Forensic Analysis:Evaluating garment shrinkage causes
Standard Test Procedure:
Sample Preparation: Cut 50×50mm specimens
Loading: Secure in steam-permeable clamps
Parameter Setup: Select steam pressure/temperature
Exposure: Run test cycle (typically 30-60min)
Analysis: Compare pre/post-test dimensions via software
Safety Precautions:
Use heat-resistant gloves when handling samples
Maintain 1m clearance from steam vents
Decontaminate chamber after testing chemicals
Send product request
Other supplier products
 |
Leakage trace tester | I. Product Overview TheLeakage Trace Testeris a precision diagnostic tool designed to visually identify and analyze fluid/gas leakage paths in sea... |
 |
Sewer Pipe Cleaning Machine | For sewer clean，pipe clean, industry tube clean, tank clean, oil removal, ground surface clean. Features: Mobile Design：Very compact machine, eas... |
 |
Paper Crease Stiffness Tester | Product Introduction: ZY-TDY300 microcomputer bending stiffness tester is used to measure the bending stiffness of paper and cardboard materials w... |
 |
Gravel Resistant Impact Tester/Stone chip tester | Standards ASTM D3170: Coating resistance to gravel impingement. ISO 20567: Paints and varnishes – Resistance to stone chipping. SAE J400... |
 |
Static Tensile Tester | Standard ASTM D3107Ensurereliable measurement of fabric elongation and tensile properties under controlled force applications. Product Advantages... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | Seller: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | Seller: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | Seller: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | Seller: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | Seller: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
