Textile Drying Time Tester
Product Overview
TheTextile Drying Time Testeris a precision instrument designed to measure the evaporation rate and drying time of textiles under controlled environmental conditions. It evaluates moisture absorption, drying efficiency, and fabric resilience, critical for quality assurance in textile manufacturing and product development.
Type: Environmental testing chamber with humidity/temperature control
Key Metrics:
Drying Time (minutes)
Moisture Content (% by weight)
Evaporation Rate (g/min/m²)
Sample Size: Up to 500×500mm (adjustable clamping frame)
Applications: Textile manufacturing, sportswear R&D, waterproof fabric testing
Compliance Standards
ISO 11092 (Textile evaporative resistance)
ASTM D737 (Air permeability and drying correlation)
AATCC 195 (Moisture management properties)
GB/T 12704-2019 (Chinese textile drying standard)
Key Features
Multi-Test Modes:
Static Drying:Fixed environmental conditions
Dynamic Drying:Simulates body movement with airflow
Rain Simulation:Water spray module for waterproof testing
Advanced Features
Real-time moisture mapping (thermal imaging)
AI-based drying prediction model
Batch data comparison (Excel/PDF export)
Automation:
Auto-reset system post-test
Motorized humidity control
Self-cleaning condensate drainage
Applications
Quality Control:Batch testing of sportswear moisture-wicking performance
R&D:Developing quick-dry synthetic fabrics
Forensic Analysis:Evaluating fabric degradation from water exposure
Textile Education:Training on drying mechanism principles
Standard Operation Workflow
Sample Preparation: Cut 100×100mm specimens
Calibration: Reference sample validation
Testing: Start cycle with predefined humidity/temperature
Analysis: Generate drying curve and moisture loss graph
Cleaning: Auto-drain condensate reservoir
Safety Precautions
Avoid contact with heated surfaces
Use grounded power supply only
Maintain 50cm clearance from airflow vents
Technical Specifications
| Parameter | Specifications |
|---|---|
| Temperature Range | 20°C–60°C (±0.5°C accuracy) |
| Humidity Control | 30%–90% RH (programmable) |
| Drying Mechanism | Airflow circulation (0.5–2.5 m/s) + infrared heating |
| Moisture Detection | Capacitive moisture sensor (±0.1% accuracy) |
| Power Supply | 220V/50Hz, 1.8kW |
| Dimensions | 1200×800×1500mm (L×W×H) |
Send product request
Other supplier products
 |
Pilling Tester for Fabric & Textile Durability Te | Standard AATCC 135(Dimensional Changes in Automatic Home Laundering) ISO 12945-2(Textiles - Determination of Fabric Propensity to Surface Fuzzing... |
 |
Geosynthetic Clogging Tester | Scope of application: The method of gradient ratio is used to measure the permeability coefficient and permeability ratio of soil and geotextile s... |
 |
Single Cable Vertical Flame Tester | introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a single insulated wire or cable is a bench scale te... |
 |
SUGA S80 Carbon Arc Weathering Tester | Applicable Standards The SUGA S80 adheres to globally recognized standards, including: ISO, AATCC, ASTM(e.g., ASTM G152. ASTM D822 for coatings... |
 |
Electronic single fiber strength meter | Compliance Standards - GB/T14337 - GB/T9997 - GB/T13835.5 - GB/T21120 - ISO5079 - ISO11566 - ASTM D3822 - BS4029 Application Scope - Used... |
Same products
 |
Blanket Flammability Test Machine | Seller: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | Seller: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | Seller: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | Seller: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | Seller: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
